Table of Contents
Advertisement
Part no.:
Delta model no.: HEH080AB
1-3. Dimension
1.
Heaters should be installed at center and low position in the enclosure for optimum
heat distribution.
2.
Heater can't be installed on wood or other combustible surfaces.
3.
The heater should be mounted in a vertical position with the terminal connect at
the bottom and the air outlet at the top as shown.
4.
The recommended clearances shown by the shadowed area indicates the space
that should be kept free for optimum operation of the heater and safe of components in
the enclosure components must not be placed closely the heater discharge area.
Please refer Temperature rise chart, the recommended distance is 200mm as usual.
Vertial Surface Mounting
Unit: mm(inch)
Material: Case AL sheet
Dimensional Tolerance: ±1mm
Optional Horizontal Surface Mounting
Page 9
Advertisement
Table of Contents
