Yamaha F50 Owner's Manual page 41

1
1. Set button
2. Mode button
3
6 7
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection warning indicator
5. Engine trouble warning/maintenance indica-
tor
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
NOTE:
The tachometer unit shows various kinds of
information according to the setting made
using the " " (set) and "
tons. For details, see the attached operation
manual.
2
ZMU05417
1 4 5 2
8 9
ZMU05418
" (mode) but-
Basic components
Pre-operation checks
Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to
" " (on).After all the displays come on and
the total hour display comes on, the gauge
will change to normal operation. If the buzzer
sounds and the water separator-warning in-
dicator blinks, consult your Yamaha dealer
immediately.
NOTE:
To stop the buzzer, press the "
" " (mode) button.
Low oil pressure warning
When the engine oil pressure drops too low,
the low oil pressure-warning indicator will
start to blink, and the engine speed will auto-
matically decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-warning in-
dicator blinks. Check the engine oil quantity
" (set) or
ZMU05430
ZMU05431
35