Core PowerBox Systems V 2.80 Manual page 79

Table of Contents

Advertisement

Available languages

Available languages

The next step is to select the
Now briefly press the button under
adjusting the value. As the screenshot shows, you can also see any Expo values which you have already set..
• Setting up differential using a fixed value:
Enter a fixed value at
Diff.
point..
• Assigning a transmitter control
On
Briefly press the
button after the
rential variation. Once the optimum value has been found, you can later set it as the fixed value.
• Assigning a trim
Diff Control
must be set to On. Now briefly press
The
The trim controls are the ideal choice if you wish to set differential settings which vary for each flight phase. With this option the
differential value you set always applies to the currently selected flight phase. This only works if the button after
set to Single.
www.powerbox-systems.com
servos
which the differential travel is to affect:
Diff. Value
in order to set the percentage value, or to assign a transmitter control for
Value. This value can also vary according to flight phase, if you select
Diff. Control
field. In this example the right-hand slider has been assigned to in-flight diffe-
Diff. Trim
to select one of the trims.
Single
at the Flight Phase
Flight Phase
is
19

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerBox Systems V 2.80 and is the answer not in the manual?

Table of Contents