Specifications; Set Contents; Core Accessories - Core PowerBox Systems V 2.80 Manual

If you have installed a proportional control or a 3-position switch, you also need to move the transmitter control to the center.
Touch Finished to complete the process. The
tion.
Caution: This has the same effect as installing the switch the other way round, i.e. this change affects all models!

10. Specifications

Power supply
Channels
Servo signal resolution
Display
Weight
Temperature range

11. Set Contents

• PowerBox CORE
•
1x PBR-9D
•
Case
•
padded neck strap
•
main adapter
•
conversion tool
•
sticker set
• screen cleaning cloth
•
exclusive Shirt „CORE"
•
Instruction manual in German and English

12. Core accessories

PBR-9D
Order No. 8210
This is a nine-channel receiver with two
redundant receiver circuits. The unit
features a
telemetry data, and an auxiliary output
which can be configured either as SRXL
bus or as channel 10.
PBR-7S
Order No. 8220
This is a seven-channel receiver with a
single receiver circuit. The unit features a
P²BUS
data, and an auxiliary output which can
be configured either as SRXL bus or as
channel 8.
www.powerbox-systems.com
Direct
button can be used to reverse the transmitter control's direction of opera-
Li-Ion
26
4096 Bit
TFT - Touch
Handsender Version: 1190 g
-30 °C bis +85 °C
P²BUS
interface for servo and
interface for servo and telemetry
Pultsender Version: 1330 g
PBR-5S
Order No. 8230
This is a five-channel receiver with a
single receiver circuit. The unit features a
P²BUS
interface for servo and telemetry
data, while its minuscule size makes it the
natural choice for small models.
PBR-26D
Order No. 8240
This is a satellite receiver featuring two
redundant receiver circuits. The unit
P²BUS
features a interface for servo and
telemetry data, and an auxiliary output
which can be configured either as SRXL
bus or S-BUS. This unit is designed to
be connected to our PowerBox power
supply systems or a flybarless system.
RECEIVERS
57