Rinnai E110CN Installation & Servicing Instructions Manual page 91

16.6 Radiators do not get hot enough or warming up takes too long
radiators do not get hot enough or
warming them up takes too long
check setting of
room thermostat
or RS101
supply water
temperature too low
incorrect choice of
installation
installation resistance
too high (given an
average T > 36°F the
boiler decreases the
load)
Check setting PARA chapter Step No. 1 and
increase if necessary
PARA chapter Step No. 2 if necessary
change
see installation instructions
check / clean water filter check dimensions
of pipes
91