Hereafter, disassemble the control- and display-module of
the IQ Touch Control by rotating the two screws on the front
side 90º to the left. The (UTP) cable which is assembled now
can be disconnected. The frontplate of the bodycooler
(Fig.4:H) can now be disassembled. In case your Q6 has an
audio-system with speakers (option), this can be remained
assembled.
Carefully disassemble the back part of the bodycooler
(Fig.4:F) and hereafter the front part (Fig.4:H). The
bodycooler normally rests on the metal strip (Fig.4:G).
Note: Do not damage the ventilators of the bodycooler
during this action!
Fig
4
.
Hold the top part in the highest position, so a second person
can unscrew the four nuts
M8x10 (Fig.5a, detail a:1 + b:1).
Fig. 5
7