Table of Contents
Advertisement
DC
L1
At the backside of the sunbed the connection for the universal remote control is located (Fig.11:DC),
in the chapter "connecting the remote control" detailed information about the function of this
connection is mentioned.
Attach the front cover (Fig.11:L3) to the machine, by first placing the top in the ditch of the bed and
hereafter by pushing the lower part of the cover to the inside. Fasten both sides of the front cover
with 3,9x19 screws like is indicated in Fig.11:M. Attach the synthetic decoration strip as a cover
between the aluminium profile and the synthetic front cover (Fig.11:N)
M
N
Now all previous actions are completed and checked, the power supply can be connected. The
sunbed is now ready for use. Read the user manual of the IQ Touch Control for instructions how to
control the sunbed. We recommend to disconnect the machine from the power supply in case the
machine will not be used for a long time.
L3
L2
Fig. 10
M
Fig. 12
Fig. 11
11
Advertisement
Table of Contents
