Table of Contents
Advertisement
Also disassembling the legs and the spring coil system is not recommended, but it can ease
transportation. In Fig.7 an explanation is given how the spring coil and the gas spring are assembled.
Unscrew the four screws (Fig.2:9) at the backside of the bodycooler (Fig.2 and 3:BC).
Fig. 2
BC
Lift the top part of your sunbed up (Fig.4) and push the bodycooler (Fig.3:BC) as far to the front so
the screws (Fig.3:5) become visible, remove them.
BC
Fig
3
.
6
Advertisement
Table of Contents
