Entrust nShield Edge Installation Manual page 24

5. If you are not planning to re-install the product, delete the configuration file
/etc/nfast.conf
Do not delete the configuration file if you are planning to re-install

the product
6. Unless needed for a subsequent installation, remove the user
the user ncsnmpd:
a. Open the file
b. Remove the line that begins with the form:
nfast:x:n
In this line, n is an integer.
c. Open the file
d. Remove the line that begins with the form:
nfast:x:...
e. If it exists, remove the line that begins with the form:
ncsnmpd:x:...
If required, you can safely remove the module after shutting down all connected
hardware.
nShield® Edge Installation Guide
if it exists.
/etc/group
with a text editor.
/etc/passwd
with a text editor.
nfast
and, if it exists,
24 of 29