Checking The Installation; Using A Security World - Entrust nShield Edge Installation Manual

Do not disconnect the nShield Edge or remove the smart card when data is being written
to the inserted smart card.

6.5. Checking the installation

To check that the software and nShield Edge have been installed correctly:
1. Log in as a user and open a command window.
2. Run the command:
enquiry
The following is an example of the output following a successful
Module ##: enquiry reply flags none enquiry reply level Six serial number ####-####-####-#### mode operational version
#.#.# speed index ### rec.
queue ##..## ... rec.
LongJobs queue ## SEE machine type ARMtype2 supported KML types DSAp1024s160 DSAp3072s256
mode operational
If the is
If the output from the
your computer, then re-run the
Ensure that the Windows power saving features are disabled. See

Power saving options

6.6. Using a Security World

See the User Guide for more about creating a Security World or loading an existing one.
nShield® Edge Installation Guide
the HSM has been installed correctly.
enquiry
command says that the module is not found, first restart
enquiry
command.
for more information.
enquiry
command:
16 of 29