RCF RM-KIT DMA-DPA User Manual page 6

Installation procedure:
1. Remove the 4 rubber feet under the unit.
2. Fix the long front bracket and a short front bracket to the
unit using 4 screws [A].
3. Fix the lateral supports using 2 screws [B] and 2 screws [C].
4. Install the assembly into a 19'' rack cabinet using suitable
lateral supports (e.g. RCF accessory AR 1050).
To guarantee a proper ventilation and avoid
overheating, leave at least 1/2 rack unit free above
and below the unit.
6
SINGLE UNIT IN 1 RACK UNIT