RCF RM-KIT DMA-DPA User Manual page 7

Installation procedure:
1. Remove the 4 rubber feet under the unit.
2. Fix 1 short front bracket to each unit using 4 screws [A].
3. Fix 1 lateral support to each unit using 2 screws [B] and 2
screws [C].
4. Fix 1 screw [B] in the lateral hole of one unit to work as a
spacer between units.
5. Fix the units together with the 2 lower supports using 4
scews [D].
6. Install the assembly into a 19'' rack cabinet using suitable
lateral supports (e.g. RCF accessory AR 1050).
To guarantee a proper ventilation and avoid
overheating, leave at least 1/2 rack unit free above
and below the unit.
DOUBLE UNITS IN 1 RACK UNIT
7