Table of Contents
Advertisement
SATA Port
Port
The optional settings are: [Enabled]; [Disabled].
M.2 SATA
Port
The optional settings are: [Enabled]; [Disabled].
Network Stack Configuration
Press [Enter] to go to 'Network Stack' screen to make further settings.
Network Stack
Use this item to enable or disable UEFI Network Stack.
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4
boot optional will not be created.
The optional settings are: [Disabled]; [Enabled].
Ipv6 PXE Support
Use this item to enable Ipv6 PXE Boot Support. When set as [Disabled], Ipv6
boot optional will not be created.
The optional settings are: [Disabled]; [Enabled].
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Use either [+] / [-] or numeric keys to set the value.
The optional settings range from [1] to [5].
Media Detect Count
Use this item to set number of times presence of media will be checked.
Use either [+] / [-] or numeric keys to set the value.
The optional settings range from [1] to [50].
38
Advertisement
Table of Contents
