Advertisement
5. Connection Procedure (See Figure 3)
The procedure for connecting the M30291T-64FPD is shown
below.
(1) Mount the NQPACK064SD-ND on the user system.
(2) Attach the YQPACK064SD on the NQPACK064SD-ND.
(3) Secure the four corners of the YQPACK064SD with the
YQ-GUIDE's.
● Do
not
use
the
YQPACK064SD for fixing the YQPACK064SD.
● The
screwdriver
NQPACK064SD-ND
HQPACK064SD. Do not use if for fixing the
YQ-GUIDE's.
(4) Attach the M30290T-EPB or M30290T2-CPE and the
M30290T-PTCB.
(5) Attach the M30291T-64FPD to the NQPACK064SD-ND.
6. External Dimensions and a Sample Foot Pattern (See Figure 4)
36.0
Figure 4 External dimensions and a sample foot pattern of the M30291T-64FPD
screws
included
with
included
with
is
used
for
fixing
M30290T-PTCB
the
the
the
NQPACK064SD-ND *
Figure 3 Connection procedure of the M30291T-64FPD
0.25
(3/4)
M30290T-EPB
or
M30290T2-CPE
(4)
(5)
YQ-GUIDE (x4) *
(3)
YQPACK064SD *
(2)
(1)
0.5
10.0
14.0
M30291T-64FPD
Be sure to use a
Phillips screwdriver.
64-pin 0.5-mm-pitch
(64P6Q-A) foot pattern
Unit: mm
Advertisement
