Voice Alert - EUFY RoboVac LR30 Hybrid+ Owner's Manual

English
Problems Solutions
• Make sure RoboVac is fully charged (indicated by a
solid blue LED light) before cleaning.
• Check if RoboVac has alerted you with any voice
RoboVac's cleaning time prompts or LED indicators. Refer to the "Voice Alert"
becomes shorter. section in this manual.
• If your cleaning time is much less than the time
mentioned above, contact eufy customer service for
help.
• Make sure you entered the Wi-Fi password correctly.
• Make sure your RoboVac, router, and mobile phone
RoboVac cannot connect to
are close enough to ensure a strong signal strength.
a Wi-Fi network.
• Make sure your Wi-Fi router supports a 2.4GHz and
802.11b/g/n band; a 5GHz band is not supported.
• Check if there are any Internet connection problems.
• Check whether you have installed the Amazon Alexa
app onto your smart device and enabled "EufyHome
- RoboVac" Skill in the Amazon Alexa app. For
You cannot control
details, refer to the "Smart Integrations" page in the
RoboVac with Amazon
EufyHome App.
Alexa..
• Make sure you have an EufyHome account and have
connected to RoboVac.
• Make sure you are using correct Alexa voice-
commands.
• Check if there are any Internet connection problems.
• Check if you have installed the Google Home app
onto your smart device and initiated the "EufyHome"
action in the Google Home app. For details, refer to
You cannot control
the "Smart Integrations" page in the EufyHome App.
RoboVac with the Google
• Check if you are using the proper commands when
Assistant.
talking to the Google Assistant. When making your
request, first say the wake phrase "Ok Google".
• Repeat your question. Speak clearly to the Google
Assistant.
40 EN

Voice Alert

When RoboVac encounters a problem, the red indicator on RoboVac will flash and you
will hear the relevant voice prompts.
The voice prompts below are only for reference and may be changed slightly after
voice pack updates. Please follow the voice prompts you have heard to find the cause
and solution below.
Voice Prompt Cause and Solution
Error 1: Front bumper Front bumper is stuck. Tap it repeatedly to remove any
stuck dust, or move the device to a new position and try again.
Wheel may be stuck or trapped. Clear any obstacles in the
Error 2: Wheel stuck surrounding area and check the wheel for any trapped dust.
Move the device to a new position and try again.
Error 3: Side brush
Side brush may be stuck. Clean it and try again.
stuck
Error 4: Rolling brush Remove the rolling brush, roller joint, roller brush cover, and
stuck. Remove and suction inlet to clean it. Once cleaned, place the items back
clean the rolling brush. into the device and try again.
Error 5: Device stuck Device is trapped. Clear any obstacles in the surrounding
or trapped area and try again.
Device may be suspended in the air. Move it to a new
position close to the original position and try again. If the
Error 6: Device trapped
device is still unable to start, clean the drop sensors and try
again.
Error 8: Low battery. Low battery. System will shut down. Charge the device and
Shutting down. try again.
English
EN 41