Electrical Connection - Technogym VARIO ARTIS User Manual

ELECTRICAL CONNECTION

Before connecting the product to the mains power supply, ensure that the
electrical system specifications comply to binding regulations. Verify the main
power supply specifications on the label affixed close to the main switch.
Open panel (A) to reach the label and connector: put a finger in the hole and pull.
Warnings
The wall socket must be located in a place where the plugging and
unplugging can be done easily and safely.
When plugging in, the power supply switch must be in the 0 position
(the equipment must be switched off).
Check the state of the power supply cable periodically.
Plug the power cable into the product socket first and then into the wall socket.
Close panel (A) putting the cable through the slot.
A
20
VARIO ARTIS