jcb 3CX Service Manual page 44

Section 3 Section 3
3 - 1 3 - 1
Greasing Greasing
Loader Arms Loader Arms - for Interval see Service Schedule - for Interval see Service Schedule
For each grease point there is another on the other side of For each grease point there is another on the other side of
the machine. the machine.
11 grease points each side - 11 grease points each side -
Total 22 grease points. Total 22 grease points.
Normally two strokes of the grease gun should be sufficient. Normally two strokes of the grease gun should be
Stop greasing when fresh grease appears at the joint. Stop greasing when fresh grease appears at the
9803/3260 9803/3260
Routine Maintenance Routine Maintenance
* *
sufficient.
joint.
8 8
9 9
Note: The illustration shows an all wheel steer machine, the Note: The illustration shows an all wheel steer machine, the
loader arms grease points are identical for 2WS and AWS loader arms grease points are identical for 2WS and AWS
machines. machines.
2 2
3 3
6 6
7 7
Section 3 Section 3
3 - 1 3 - 1
1 1
4 4
5 5
140210 140210
Issue 2* Issue 2*