Operation; Spares And Accessories; Maintenance And Servicing - Cole Parmer INC-200 Series Instruction Manual

Operation

1. Position the apparatus on a firm level surface
away from any heat sensitive material and
switch the unit ON.
2. If an incubation temperature of 37ºC is
required, press the pre-set temperature
switch to the top.
3. If another incubation temperature is
required, press the pre-set temperature
switch to the bottom (variable) and set the
temperature as follows:
INC-200: Turn the temperature control knob
clockwise to the desired setting. The load
indicator will remain lit until the desired
temperature setting is reached at which time
it will flash.
INC-200D: De-press and hold the press to set
switch and turn the temperature control
knob until the desired temperature appears
on the display. On releasing the switch, the
display will revert to the actual temperature
of the incubator. The load indicator will
remain lit until the desired temperature
setting is reached at which time it will flash.
Maintenance & Servicing
WARNING: Ensure the unit is
disconnected from the mains
electricity supply before attempting
maintenance or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the Service Department, quoting
both the model number and serial number:
Email: cpservice@antylia.com
Tel: +44 (0)1785 810475
Only spare parts supplied or specified by Antylia
Scientific or its agents should be used. Fitting of
non-approved parts may affect the performance
of the safety features designed into the
instrument. If in any doubt, please contact the
Service Department of Antylia Scientific or the
point of sale.
For any other technical enquiries, please contact
the Technical Support Department:
Email: cptechsupport@antylia.com
Tel: +44 (0)1785 810433.

Spares and Accessories

Description
Fuse 3.15AL
Thermal Fuse
Potentiometer and Lead
Transformer
Heater
Base Plate
Shelf System
Gaunlet Front Panel
Gaunlet (per pair)
Tray
Catalogue Number
ESM3C15(S)
ESI6020(S)
T55
T45(S)
HSI6005(S)
SI60/1
SI60/2
SI60/3
SI60/4
SI60/5