Function Overview; Product Overview; Serial Numbers On The Product; Engine - Husqvarna R 214T Workshop Manual

8.1 Product overview

1. Forward pedal
2. Rearward pedal
3. Lift lever for the cutting deck
4. Cutting height lever
5. Ignition lock
6. Throttle control
7. Hour meter
8. Engine cover lock
9. Parking brake pedal
10. Lock button for parking brake
11. Seat adjustment
12. Type plate with scannable codes
13. Fuel tank cap
14. Oil drain plug
15. Battery
16. Lever to engage or disengage the drive

8.2 Serial numbers on the product

The engine serial number (A) is found on the left side of
the engine.
The transmission serial number (B) is found behind the
wheels on the left side of the product.
The product serial number (C) is found on the printed
type plate at the front below the seat. From the top, the
type plate gives the designation, the type number from

16 - Function overview

8 Function overview
1 2 3
9 10 11
4 5 6 7
12 13 14
the manufacturer and the serial number (s/n) of the
product.
The type designation and serial number are necessary
to complete an order for spare parts.

8.3 Engine

The product has an air-cooled Husqvarna engine.
Information about engine repairs are not given in the
workshop manual. Refer to the engine manual supplied
by Husqvarna.
8
15
A
B
1676 - 001 - 26.11.2021
16
C