Transmission; Steering; Cutting Deck - Husqvarna R 214T Workshop Manual

8.4 Transmission

The product has a hydrostatic transmission. Forward
and rearward pedals adjust the speed. The hydraulic
pump is in the rear axle. Cables from the forward and
rearward pedals operate the hydraulic pump.
The illustration shows the rear axle from above. To
move the product without the rear axle operation
engaged there is a hydraulic bypass valve. The bypass
valve is operated with a control behind the left wheel.
The hydraulic oil is drained through two plugs on the
bottom of the transmission. One plug drains the
hydraulic motor and the other plug drains the differential.

8.5 Steering

The product has articulated steering. Movement from
the steering wheel is moved to the rear axle through
chains and wires.
1676 - 001 - 26.11.2021
The turning radius with articulated steering is very small.
At full lock the circle with grass that is not cut is only 20–
30 cm/8"–12" for different models.
Diagram of articulated steering function.
Steering column ball bearing (A).

8.6 Cutting deck

The product cuts satisfactorily in small spaces because
of the front attached cutting deck.
The Combi Deck operates with BioClip or rear
discharge. When the BioClip plug is removed, the
cutting deck ejects the grass rearward.
A
Function overview - 17