Advertisement

Quick Links

Moving Head
Hot BEAM 2R
User manual
!
Please read the manual before installing and using this lighting
Keep it for future reference

Advertisement

Table of Contents
loading

Summary of Contents for Kudux Hot BEAM 2R

  • Page 1 Moving Head Hot BEAM 2R User manual Please read the manual before installing and using this lighting Keep it for future reference...
  • Page 2 If you have any remarks or comments, please share them with us. We will be grateful for any suggestions that will help us make products that are even better and devices that satisfy your needs. R&D Team WWW.KUDUX.COM...
  • Page 3: Table Of Contents

    Install standard ........................8 Power supply ........................9 Lamp ..........................9 Color wheel, gobo wheel ....................11 Control panel ........................12 CONTROL PANEL MENU OPERATE ................12 DMX Channels ......................15 Clear and maintenance ....................19 Contact: ........................19 WWW.KUDUX.COM...
  • Page 4: Statement

    Production introduces Thank you for choosing this HOT BEAM 2R products, this model is the moving head light which is the latest development of the smart, efficient products, beautiful shape, smooth R & D, combined...
  • Page 5: Part Introduction

    02 — control wheel 01 — 3 Pin DMX in 02 — 5 Pin DMX in 03 — Power switch 04 — Power in 05 — 3 Pin DMX out 06 — 5 pin DMX out 07 — Fuse WWW.KUDUX.COM...
  • Page 6: Safety Information

    The Fixture should be used with the protection screen together. 3.5. Prevention of electric shock The electrical connection must only be carried out with corresponding qualifications; Before installing, make sure you use the power voltage lamps must comply with the identified WWW.KUDUX.COM...
  • Page 7: Package

    Handling at least allow the device to cool for 20 minutes. • Do not replace the non-original parts. Package 4.1. Attachment HOT BEAM 2R packed with fly-case of one in one, two in one, or carton box. Attach follow accessory. ACCESSORY CONTENT QUANTITY...
  • Page 8: Install Standard

    Before power on, make sure you have opened the X, Y axis lock! Install standard 5.1. Install lock HOT BEAM 2R can be placed on the stage, or mounted in an arbitrary direction of the truss. Two fast locks system could fix the item easily. 5.2. Equipment fixed •...
  • Page 9: Power Supply

    OSRAM SIRIUS HRI 150 W 4000 HOURS 9300K WARNING! There is a safety hazard or damage if install similar bulb to reduce the risk of damage to light, do change the lamp before using time over 90% of lamp life. WWW.KUDUX.COM...
  • Page 10 3. One hand press the lamp holder, another hand hold the lamp and pull out the wires 4. after take apart the lamp, please check the inside glasses, clear it will make the light better effect WWW.KUDUX.COM...
  • Page 11: Color Wheel, Gobo Wheel

    5. installed the lamp after replaced. 8. Color wheel, gobo wheel Fixed Gobo Rotation Gobo MINIHOT BEAM Have 6 linear prism and 8 facet prism. With Focus . Rotation . Zoom . Shaking . Rotation speed changeable WWW.KUDUX.COM...
  • Page 12: Control Panel

    90S "Off " Menu back not automatic Backlight blinking when no open Backflah Backlight blinking when ▲ "Return " return no dmx "Off " PAN SCAN Normal "Xreverse" "Open" Pan Scan Reverse "Off " Tilt Scan normal WWW.KUDUX.COM...
  • Page 13 Dmx reset not accept DMX Reset Open Dmx reset accept ▲ Return Return "Wink" Lamp off "Ilum" Lamp on "Default " "Wink" Lamp off by manual "Ilum" lamp on by manual "Control " "LampSett" Close other signal "Off " control the lamp WWW.KUDUX.COM...
  • Page 14 Open fixture time "AssiTool" "TimeLimi" 0000-9999 limit "TimsLimi" 0000-9999 fixture times limit Clear the time of TimeCLEA clear used Clear the times of CutClea clear used "Passwor1" 000-255 Revise password 1 "Passwor2" 000-255 Revise password 2 "Passwor3" 000-255 Revise password 3 WWW.KUDUX.COM...
  • Page 15: Dmx Channels

    11. DMX Channels MODE 1 MODE 2 DMX Value Description 0-255 0-255 Pan Fine 0-255 Tilt 0-255 Tilt Fine 0-255 Pan/Tilt speed Micro 0-19 Empty Energy-saving mode (230W) 20-24 25-129 Empty 130-139 Lamp on by dmx 140-149 PAN/TILT reset 150-159 Empty WWW.KUDUX.COM...
  • Page 16 135-138 Deep blue 139-143 Yellow 144-147 Green 148-152 Magenta 153-157 Azure 158-161 162-166 Dark green 167-171 Amber 172-176 blue 177-180 orange 181-185 186-189 Forwards rainbow ,speed 190-215 down 216-217 No rotation Backwards rainbow, speed 218-243 244-255 Random color empty WWW.KUDUX.COM...
  • Page 17 Small beam 3 Static gobo run from slow to 200-255 fast Rotate gobo 0-8 empty 9-17 Gobo 1 18-26 Gobo 2 27-35 Gobo 3 36-44 Gobo 4 45-53 Gobo 5 54-62 Gobo 6 63-71 Gobo 7 72-80 Gobo 8 WWW.KUDUX.COM...
  • Page 18 Run from fast to slow in 128-191 clockwise 192-194 empty Run from slow to fast in anti 195-255 clockwise Frost 0-64 empty 65-255 linear frost zoom 0-255 Linear zoom 0-255 Zoom fine 0-255 focus 0-255 Zoom fine 0-255 empty WWW.KUDUX.COM...
  • Page 19: Clear And Maintenance

    1. Cut off the power supply, cool down the lamp and open the covers. 2. Using vacuum or pressure blows gently blow any dust and floating structures. 13. Contact: website Please check who is our dealer in your country at our www.kudux.com or write direct to us by email: office@kudux.com WWW.KUDUX.COM...

Table of Contents