Leuze electronic BTF815-30 Manual page 9

Safety
CAUTION
Injury due to excessive weight!
Lifting and moving the floor stand can cause injury.
Ä
If necessary, lift the floor stand with a lifting aid.
Ä
Wear safety shoes.
Overview
The BTF815-30M floor stand enables the secure floor mounting of a safety laser
scanner of the RSL 400 series. With the floor stand, you can adjust the scanning
height of the safety laser scanner from 75 mm to 375 mm.
NOTICE
The BTF815-30M floor stand can only be used in combination with the
BTU800M mounting system (part no. 53800130).
Four M8 x 20 screws are included in the scope of delivery of the
BTF815-30M for mounting the BTU800M.
1
Scope of delivery
The floor stand is delivered fully assembled.
The floor stand consists of the following parts:
A Cover
B Side guard
C Floor stand
D RSL mounting bracket (for BTU800M mounting system)
E Washers
F M8 x 20 screws
Mounting the BTU800M and RSL 400 on the floor stand
To mount the BTU800M mounting system, you require a size 5 Allen key. Follow
the instructions for the mounting system.
Ä
Fasten the BTU800M mounting system (not included in the scope of delivery)
to the RSL mounting bracket of the floor stand with the M8 x 20 cheese head
screws. Tightening torque: 25 Nm
Ä
Fasten the RSL 400 safety laser scanner to the BTU800M mounting system.
EN
9