Table of Contents
Advertisement
1 Introduction
This installation guide describes the procedure to install the StreetWAVE™ SW-1000 Roadside
Unit (RSU).
The SW-1000 RSU is an advanced DSRC Unit created to enable communication for Vehicle to
Infrastructure (V2I) applications. It has been designed and tested to be compliant to the US-
DOT v4.1 RSU Specification. It has been designed to be installed at any of the following
locations:
•
A mast arm
•
A utility pole at the roadside
•
An overhead sign bridge
Note: This document describes the installation procedure of the StreetWAVE™ device on a
pole at the roadside.
1.1 Overview
This guide explains how to install, maintain, uninstall, and troubleshoot your StreetWAVE™
Roadside Unit.
For detailed instructions on using all the StreetWAVE™ features, refer to the Savari
StreetWAVE™ Roadside Unit User Guide.
1.2 Audience
This installation guide is created for the individuals installing Savari StreetWAVE™ Roadside
Unit.
1.3 Safety Instructions
You need to follow the following basic safety guidelines when installing the Savari
StreetWAVE™ device:
•
Read the installation instructions before you connect the system to its power source.
Savari Inc., Confidential
Copyright © Savari, Inc. 2017
StreetWAVE™SW-1000™ Installation Guide
3
Advertisement
Table of Contents
