Table of Contents
Advertisement
3 Post-installation Steps
3.1 Powering On the StreetWAVE™
Once you mount the StreetWAVE™ on the location of your choice, ensure the following to
power on the device:
•
Turn on the power supply to the POE injector.
•
The "PWR" LED on the StreetWAVE™ unit turns green. If the LED is off or in any other
state, refer to the "Savari StreetWAVE™ Roadside Unit User Guide".
After powering on, the StreetWAVE™ device is ready to use.
For information on using the different features of the device, refer to the Savari StreetWAVE™
Roadside Unit User Guide.
Savari Inc., Confidential
Copyright © Savari, Inc. 2017
StreetWAVE™SW-1000™ Installation Guide
14
Advertisement
Table of Contents
