Table of Contents
Advertisement
4 Uninstalling the StreetWAVE™
The following is the procedure to uninstall the StreetWAVE™:
1. Disconnect the power from the StreetWAVE™.
2. Remove the self-sealing tape by slitting the tape and peeling it away from the connectors
and cables.
3. Unscrew the DSRC and GPS antennas.
4. Unscrew the Ethernet sealing assembly.
5. Using a small, standard screwdriver, depress the RJ-45 locking tab inside the Ethernet
receptacle, and gently pull the cable to disconnect.
6. Hold the StreetWAVE™ and unscrew the mounting straps.
Savari Inc., Confidential
Copyright © Savari, Inc. 2017
StreetWAVE™SW-1000™ Installation Guide
15
Advertisement
Table of Contents
