Parker F11 Series Service Manual
Hydraulic motor/pump
Hide thumbs
Also See for F11 Series:
- Service spare parts list (40 pages) ,
- Service manual (16 pages) ,
- Installation and start-up manual (8 pages)
Advertisement
Quick Links
Bulletin HY30-5503-M1/UK
Assembling
1. Place the ring gear on the shaft
with the guide pin located against the
guide hole.
2. Press down the big tapered roller
bearing together with the ring gear.
3. Place the distance ring on the big
tapered roller bearing.
Service Manual
Series F11
4. Place the small tapered roller bear-
ing on the shaft as on the picture.
5. Press down the small tapered roller
bearing in small steps until correct
preload is achived. Not to tight and no
backlash.
6. Place the lock washer(s) on to the
shaft.
7
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Advertisement
Related Manuals for Parker F11 Series
Summary of Contents for Parker F11 Series
- Page 1 Service Manual Bulletin HY30-5503-M1/UK Series F11 Assembling 1. Place the ring gear on the shaft 4. Place the small tapered roller bear- with the guide pin located against the ing on the shaft as on the picture. guide hole. 2. Press down the big tapered roller 5. Press down the small tapered roller bearing together with the ring gear. bearing in small steps until correct preload is achived. Not to tight and no backlash. 3. Place the distance ring on the big 6. Place the lock washer(s) on to the tapered roller bearing. shaft. Parker Hannifin Pump and Motor Division Trollhättan, Sweden...
- Page 2 Service Manual Bulletin HY30-5503-M1/UK Series F11 Assembling 7. Assemble the round nut and tighten 10. Assemble the cylinder barrel. it until one opening is in correct posi- Instructions on page 11. tion for the lock washer. 8. Secure the round nut as shown in 11. Assemble the O-rings on the dis- the picture. tance ring. 9. Assemble the valve plate. Make 12. Carefully tap down the distance sure the slot is in correct position and ring to the barrel housing. Lubricate the valve plate is located as shown in them with oil before assembly. picture. Parker Hannifin Pump and Motor Division Trollhättan, Sweden...
- Page 3 Service Manual Bulletin HY30-5503-M1/UK Series F11 Assembling 13. Assemble the shims. 16. Make sure the timing is correct. 14. Assemble the pistons. Lubricate 17. Carefully tap down the bearing the ball sockets before assembly. housing. 15. Assemble the shaft package with 18. Lubricate the sealing surface on pistons in to the cylinder barrel. the shaft before assembling the shaft seal. Parker Hannifin Pump and Motor Division Trollhättan, Sweden...