HIAB 320T Operating Manual / Spare Parts List
  1. Manuals
  2. Brands
  3. HIAB Manuals
  4. Construction Equipment
  5. 320T
  6. Operating manual / spare parts list

HIAB 320T Operating Manual / Spare Parts List

Hide thumbs
Table of Contents

Advertisement

Quick Links

Ver. : HIAB320T-201601
EN
320T
OPERATING MANUAL
& SPARE PARTS LIST
Cargotec Korea Ltd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 320T and is the answer not in the manual?

Questions and answers

Related Manuals for HIAB 320T

Summary of Contents for HIAB 320T

  • Page 1 Ver. : HIAB320T-201601 320T OPERATING MANUAL & SPARE PARTS LIST Cargotec Korea Ltd...
  • Page 2 320T OPERATING MANUAL Cargotec Korea Ltd...

  • Page 3: Table Of Contents

    Contents 1. Foreword - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - 5 2.
  • Page 4 4. Technical description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29 4 - 1. Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29 4 - 2.
  • Page 5 8 - 4. Changing a filter insert - - - - - - - - - - - - - - - - - - - - - - - 52 8 - 5. Inspection point when operating - - - - - - - - - - - - - - - - - 53 8 - 6.

  • Page 6: Foreword

    1. Foreword This operator’s manual for HIAB 320T teaches you the right way to operate and maintain your crane. In this Operating manual are : - Important safety precautions and warnings - Important directions for use - An explanation of the arrangement of Operator’s manual - An explanation of the directions in the Operator’s manual...

  • Page 7: The Operator's Manual

    2. The Operator’s Manual 2-1. Structure The Operator’s Manual for your crane consists of : - The Operator’s Manual applies to all HIAB stiff-boom cranes. It contains important safety precautions and warnings. The operator’s Manual also contains important general instructions for use.

  • Page 8: Indications In The Operator's Manual

    2-2. Indications in the Operator’s Manual The following indications are used in the Operator’s Manual : ! TIP Tip to make work easy to carry out ! NOTE Extra information that can prevent problems CAUTION Hazard for the crane or crane components. Follow the instructions carefully WARNING Danger of injury to yourself or to bystanders, or...

  • Page 9: Other Indications

    2-3. Other indications Symbol for reference to illustration. Refers to an illustration. Symbol for reference to a component in an illustration. ① Refers to a component in an illustration. [Option] Indication for parts that are non-standard for the crane, but an option. !NOTE 1.

  • Page 10: Safety Precautions And Warnings

    Never operate the crane when you are sick, tired out, under the influence of medicines, alcohol or other drugs 1. Take the delivery instructions from your HIAB dealer. Or be instructed by an experienced person from your own company.

  • Page 11: Operating Conditions

    Operation and Maintenance for your type of crane. All other maintenance work should be done in a HIAB service workshop. ▲ Deal yourself only with the faults described in the Operation and Maintenance for your type of crane. All other work to rectify faults may only be performed by personnel in a HIAB service workshop.
  • Page 12 With wind speed less than 13.3 m sec [approx. 29.7 mph] Consult the wind speed table, Appendix 1. ▲ DANGER Never use the crane in a high wind or storm. When wind speeds exceed 13.3 m/sec the crane will behave unpredictably. ▲...

  • Page 13: Use And Maximum Load

    3-4. Use and maximum load Use your crane only for loading and unloading cargo. ▲ DANGER Never lift people with the crane! People may only be lifted by cranes that are approved for it and equipped with a special platform for lifting people for work at heights.

  • Page 14: Preparations For Use

    3-5. Preparation for use ▲ DANGER Ensure that there are no unauthorized persons within the operating range of your crane! ! TIP Mark out the working range, with for example, cones. ! TIP Put on your vehicle warning lights. ▲ DANGER If a part of the crane comes in contact with an electricity line, you will certainly be electrocuted!
  • Page 15 Table 1 : Minimum distance between crane and overhead electricity lines Minimum distance Minimum distance Voltage(V) to an insulated to an uninsulated conductor conductor < 500 V 0.6 m 2.5 m 500 ~ 40,000 V > 40,000 V Voltages are found : Up to 500V : to houses 500 ~ 40,000 V : trams, trains...
  • Page 16 ▲ Check that the ground is sufficiently firm. Check also that the ground is not undermined. Look out for sewers, cellars, excavations etc. The outrigger legs must not be able to sink in. ▲ DANGER On a slippery surface, for example because of frost : Place chocks under the wheels.

  • Page 17: Use Of Crane

    3-6. Use of the crane 3-6-1. Starting crane operation ▲ DANGER Ensure that you can see the outrigger legs when you are operating them. Operate the outrigger legs from the side of the legs concerned. Do not stand in front of the hydraulically- operated outrigger legs when you are operating them! ▲...
  • Page 18 ▲ Do not lower the outrigger legs on the edge of an embankment, soft shoulder, slope etc. Lower the outrigger legs only on a flat surface. ▲ Slide the outrigger extension beams on both sides of the vehicle out completely. Then lower the outrigger legs for support. ▲...

  • Page 19: Crane Operation

    3-6-2. Crane operation ▲ DANGER Keep checking that there is no unauthorized person within the operating reach of the crane! ▲ Make certain that you can always see the load! If your view of the loads is not adequate, have someone else give you signals.
  • Page 20 ▲ WARNING Never push a load along the ground or the vehicle load space with the extension boom. This can cause damage, that will need expensive repairs, to the extension cylinder. ▲ Never use the extension boom as a jack. This could damage the slewing bearings and the connection between the crane column and the crane base.

  • Page 21: Ending Crane Operation

    ▲ When loading the vehicle : Take the load off the outrigger legs by withdrawing them slightly. The outrigger legs must remain in light contact with the ground. ▲ Never operate the outrigger legs if the crane has a load. ▲...
  • Page 22 - Check that the locking works properly. - Disengage the P.T.O or power supply after the work. If you drive with the P.T.O or power supply engaged, this will cause serious damage to the P.T.O/gearbox combination. - Only after doing so should you drive away with the vehicle. ▲...

  • Page 23: Driving With The Crane

    3-7. Driving with the crane ▲ DANGER Never drive the vehicle if there is a load suspended from the crane. ▲ Before you start to drive away : Check that you have no pump flow to the crane control valve. The PTO or power supply must be disengaged.

  • Page 24: Use Of Lifting Equipment

    3-8. Use of lifting equipment ▲ DANGER Use only lifting accessories (winch, grapple, rotator) which are suitable for your crane. Get in touch with a HIAB dealer. ▲ Never attempt to install add-on lifting accessories yourself! Add-on lifting accessories may only be installed by an authorized HIAB dealer.

  • Page 25: Use Of Demountable Cranes

    3-9. Use of demountable cranes ▲ DANGER Ensure that there are no unauthorized persons in the immediate vicinity of the crane. When putting the crane onto or off the vehicle people can suffer fatal crushing injuries! ▲ After setting up : Check that the crane is properly locked! ▲...

  • Page 26: Maintenance And Service

    Only carry out the maintenance yourself that is prescribed in the Operation and Maintenance for your type of crane. All other maintenance work may only be carried out by HIAB service workshop! ▲ Do not do any welding work on the crane yourself! Welding work on the crane...
  • Page 27 Do not drill into the crane yourself. Drilling work on the crane may only be carried out by, or in close consultation with, a HIAB service workshop. ▲ Never try to reinstall the crane. Only a HIAB Dealer. may reinstall the crane.

  • Page 28: Faults

    Ensure that faults in the crane are rectified immediately! Follow the instructions for faults, in the Operation and Maintenance for your type of crane, exactly. Never rectified faults yourself that may only be rectified by a HIAB service workshop. ▲ DANGER If there is an oil leakage from the hydraulic system : Keep well away from an oil leak.

  • Page 29: Warranty

    HIAB only provides a warranty if : - The instructions for maintenance and service have been followed, and - Original HIAB parts have been used, and - All the seals are still intact and - The maintenance schedule in your Crane logbook is filled in up-to-...

  • Page 30: Technical Description

    4. Technical description 4 - 1 Specification Description Specification Remarks Lifting Capacity 31.5 ton-m Working Radius 12.09 m 2.0 m - 10000 kg Outreach - Lifting 4.89 m - 6240 kg Capacity 8.49 m - 3285 kg 12.09 m - 2150 kg Working Height 12.9 m From bottom of base...

  • Page 31: Outline View

    4 - 2 Outline view...

  • Page 32: Lifting Capacity Table & Working Radius

    4 - 3 Lifting capacity table & working radius boom boom boom boom angle R(m) Q(kg) R(m) Q(kg) R(m) Q(kg) 80 deg 0.44 10000 1.07 8000 1.69 6000 70 deg 1.35 10000 2.58 7100 3.81 4910 60 deg 2.20 9670 4.00 5340 5.80...

  • Page 33: Hydraulic Diagram

    4 - 4 Hydraulic diagram...

  • Page 34: General Description

    5. General description 5 - 1 Basic operation principle Hiab 320T-3 crane consists of mainly steel structures and hydraulic components. The required power source for crane operation comes, via the chassis’ power take off (PTO), from the hydraulic pump giving high pressure hydraulic oil.

  • Page 35: Main Components

    5 - 2 Main components 1) Base 2) Column 3) Boom system 4) Control valve 5) Winch...

  • Page 36: Base

    1) Base The base is connected with the column structure by slewing bearing, which makes the crane rotate, and is mounted on the chassis frame with strong anchor bolts. 2) Column The column is of a closed welded box design and connected with the base.

  • Page 37: Boom System

    4) Control Valve The Hiab 320T-3 stiff boom crane is equipped with 4-function control valve which is for main controls of the crane (slewing, derrick, winch, extension). This valve is equipped with built-in main relief and port relief valves shown in the hydraulic diagram.

  • Page 38: Winch

    5) Winch The winch consists of hydraulic motor, gearbox and winch drum. The winch is installed inside of the column structure. The hydraulic brake is included in winch gearbox. 5 - 3 OLP (over load protection) system The OLP system is a fully hydraulic concept that stops the main hydraulic flow when the pressure in the derrick cylinder has reached the maximum allowable level, preventing aggravating movements.

  • Page 39: Operation

    6. Operation 6 - 1 Before operating the crane Turn on the power the power pack. Turn on the power the remote controller. (optional) Slew the crane where the load is located in. The crane is now ready for use. 6 - 2 Warming up when cold weather In cold weather, the viscosity of the operating oil could be very high.

  • Page 40: Operation Of Crane

    6 - 3 Operation of crane Standard control valve has 4 levers for operating crane. Please refer to below chart explaining the function of each lever. Operated components pull push Slewing left right Derrick down Extension retracting extending Winch down...
  • Page 41 (note) 1) When boom raising / lowering, Move the lever slowly when loaded. Fast movement could cause tilting of the chassis or damages to the crane due to dynamic forces. 2) When hook raising / lowering, Do not lower more when load touches the ground. If you do so, the wire can get tangled.

  • Page 42: Over Winding Alarm

    Never slew until the load is clear of the ground. 6 - 4 Over winding alarm Hiab 320T-3 is equipped with an overwinding alarm system as an option. If the hook block is too near the boom tip, the alarm system will be activated.

  • Page 43: After Operating The Crane ( For Driving )

    (note) Do not shorten the wire length. Please be careful when the extending boom or the raising hook, because the alarm system can not be activated when of the electric wire is damaged etc. 6 - 5 After operation the crane (for driving) Retract the booms fully Rotate the boom at the driving position (front or rear side.
  • Page 44 (note) Driving with the pump running may cause PTO and pump damages. It’s very dangerous to drive without the hook in a fixed position. Check again that the outrigger system is fully retracted and locked.

  • Page 45: Safety Instruction When Operating

    7. Safety instruction when operating Press the clutch pedal fully and then engage or disengage the When cold weather, please warm up the operating oil for 10 - 15 minutes Operate the crane on even ground condition Before operating the hook, turn on the overwinding alarm switch Be careful not to touch the hook block on the ground, which could cause the wire to get tangled...
  • Page 46 Operate the crane smoothly If operated fast, the life cycle of the crane can be reduced and/or there can be some component troubles. At starting/finishing point, the movement should be reduced. Before operating the crane, make sure the outrigger system is extended and firmly settled on the ground.

  • Page 47: Preventive Service & Maintenance

    8. Preventive service & Maintenance 8 - 1 Daily Inspection Where? What? Abnormal noise and/or heat? Power take off Engaging movement is smooth or not? Drive shaft Loosened or not? Oil level? Oil tank Leakage? Leakage? Greasing condition? Slewing system No loosened bolts? Abnormal noise? Shaft condition?

  • Page 48: Slewing Bearing & Mounting Bolts

    If there is some abnormal noise from the slewing system and/or the mounting parts when operating the crane or driving, please consult your Hiab dealer or service center. That kind of noise could come from loosened condition of the mounting bolts. At least, mounting bolts of slewing bearing located inside of the column should be checked every 2 years.
  • Page 49 Adjusting twisted wire rope Wire rope tends to turn in the untwisting direction under tension. When the hook carries two or more wire rope slings, they can easily turn, especially when they are still new. Wire rope becomes steady with use. The wire rope adjustment procedure is: Extend the boom fully Set the boom to an angle of about 65 deg...
  • Page 50 Turn the wire socket opposite to the wire rope twisting direction, except in the case of 3-rope sling in which case the wire socket should be turned in the same direction.
  • Page 51 How to look after the winch rope The winch rope must be regularly cleaned and greased for maximum life, bearing in mind that the rope is subject to wear and to heavy stresses which set a limit of it’s service life.
  • Page 52 The rope develops kinks or a heavy spiral twist Lubricating a winch wire When the rope is used for a long period it becomes dry, which gives rise to rapid wear and to rust attacks. Accordingly, it is necessary to lubricate or grease the rope at regular intervals.

  • Page 53: Changing A Filter Insert

    50 running hours and from then on every 500 running hours, subject to a minimum of at least two changes a year. For best results, always fit a genuine Hiab insert. Replacing the return oil filter insert Clean the immediate surroundings of the return filter.
  • Page 54 Replacing the filter insert in the pilot filter and in the high pressure filter Clean the immediate surroundings of the pressure filter. Dismantle the filter housing ①. Remove the filter insert ②. Clean the filter housing. Fit a new filter insert. Also fit new sealings ③. Reassemble the filter housing.

  • Page 55: Inspection Point When Operating

    8 - 5 Inspection points when operating Is there any leakage? Does the crane operate smoothly? Is there any abnormal noise? How about the oil temperature? If the oil temperature is higher than 75 deg C, then stop the crane operation 8 - 6 Inspection after operation Clean &...

  • Page 56: Inspection & Maintenance After 6 Months In Operation

    Cleaning, replacement of filters Check oil levels and lubrication in accordance with the lubrication chart in the manual Put the crane through test-running and test-loading, and listen for any suspicious noises 8 - 8 Inspection & maintenance after 6 months in operation Clean the crane Check pressure settings and lead seals Check for oil leakage...

  • Page 57: Lubrication

    9. Lubrication 9 - 1 Hydraulic oil changing Check the level in the tank every day. The oil level must be visible in the sight glass. At this check, the crane must be in parked position. Top up with hydraulic oil if necessary. Hydraulic oil becomes contaminated in time, and malfunctions may begin to appear in the hydraulic system.
  • Page 58 When changing the oil, change the filters at the same time. The hydraulic system and the hydraulic fluid are matched in respect of lubricating performance, effect on the seals and other materials, and non-inflammability. For this reason, do not mix different types of hydraulic fluid, such as mineral oils, synthetic fluids and water-based fluids, and never adulterate your hydraulic fluid with diesel oil or alcohol-based products.

  • Page 59: Lubrication

    9 - 2 Lubrication Good performance and trouble-free operation of the crane depends a great deal on service. For this reason, always follow the recommendation on the lubrication chart. Recommendable grease (or equivalents) ● Shell Alvania grease EP2 ● Mobil Mobilux EP2 ●...

  • Page 60: Fault Tracing

    10. Fault Tracing Fault tracing is mainly based on organized routine for finding a certain functional disorder, its reason and how to correct it. The following charts contain some faults which may arise during operation, how they appear and which steps to be taken. Most important, however, is that the crane is checked and necessary adjustments made before the crane is taken into operation.
  • Page 61 Dirt in counter balance Clean and/or change valve or damage in seal Internal leakage Repair Boom do not extend cylinder Sequence valve fault Clean/repair Lack of oil Top up the oil Dirties in counter balance Boom do not retract Clean and/or change valve or damage in seal Internal leakage...

  • Page 62: Appendix 1 : Wind Speeds

    Appendix 1 : Wind speeds Wind speed averaged over 10 min. at Wind a height of 10 m characteristics force Above flat ground Wind type Calm, smoke rises vertically or nearly vertically 0.0 ~ 0.2 Calm Wind direction recognizable from smoke plumes, 0.3 ~ 1.5 wind Slight breeze...

  • Page 63: Appendix 2 : Signals When Using A Crane

    Appendix 2 : Signals when using a crane If you cannot see the load properly, someone else should give you signals. This appendix gives a number of the standard signals. !NOTE Have the person giving the signal stand facing you as far as possible. The speed of the hand and arm movements indicate at what speed the crane movement should be made.
  • Page 64 Very short movement Place the hands a very short distance apart, with the palms facing each other. The hands may be held either horizontally or vertically. The next movement may be : Lift, lower, move the lifting gear, change the reach, or turn. Change the reach Indicate this by means of the hand, if necessary providing a precise indication with...
  • Page 65 Close the grapple Move both hands close together. Lift the open grapple a little Extend both arms at shoulder height, with the palms facing upwards. Make vertical movements with both arms outstretched. Keep the grapple in position briefly Raise the hand slightly drooping, with the fist clenched.
  • Page 66 320T SPARE PARTS LIST Cargotec Korea Ltd...
  • Page 67 Instruction This spare parts catalogue has several main divisions each embracing a main component group, where you can find easily the necessary part. Each drawing is followed by the corresponding written material Parts shown in the drawings are numbers by position starting from 1, drawings are numbered as;...
  • Page 68 주요 부분 지시도 HIAB320T-3 0 : 5 MAIN SUBDIVISIONS 2016. 01. HIAB320T-3 - 1 : 5 HIAB320T-3 - 12 : 0 크레인 총 결합체 쉬브 결합체 GENERAL ASS'Y, HIAB320T-3 SHEAVE ASS'Y HIAB320T-3 - 2 : 2 HIAB320T-3 - 13 : 1 베이스...
  • Page 69 크레인 총 결합체 HIAB320T-3 1 : 0 GENERAL ASS'Y, HIAB 320T-3 2013. 12. SPARE PARTS LIST...
  • Page 70 크레인 총 결합체 HIAB320T-3 1 : 0 GENERAL ASS'Y, HIAB 320T-3 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No.
  • Page 71 베이스 및 칼럼 결합체 HIAB320T-3 2 : 2 BASE & COLUMN ASS'Y 2015. 02. SPARE PARTS LIST...
  • Page 72 베이스 및 칼럼 결합체 HIAB320T-3 2 : 2 BASE & COLUMN ASS'Y 2015. 02. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks...
  • Page 73 베이스 및 칼럼 결합체 HIAB320T-3 2 : 2 BASE & COLUMN ASS'Y 2015. 02. SPARE PARTS LIST...
  • Page 74 베이스 및 칼럼 결합체 HIAB320T-3 2 : 2 BASE & COLUMN ASS'Y 2015. 02. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks...
  • Page 75 선회 구동장치 HIAB320T-3 3 : 2 SLEWING DRIVES 2016. 01. SPARE PARTS LIST...
  • Page 76 선회 구동장치 HIAB320T-3 3 : 2 SLEWING DRIVES 2016. 01. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks A02-1528 선회...
  • Page 77 유압 모터 HIAB320T-3 4 : 0 MOTOR, HYDRAULIC 2013. 12. SPARE PARTS LIST...
  • Page 78 유압 모터 HIAB320T-3 4 : 0 MOTOR, HYDRAULIC 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks RT-0015 151-5568 유압...
  • Page 79 유압 모터 HIAB320T-3 4 : 0 MOTOR, HYDRAULIC 2013. 12. SPARE PARTS LIST...
  • Page 80 유압 모터 HIAB320T-3 4 : 0 MOTOR, HYDRAULIC 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 681X0393 스크류...
  • Page 81 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. SPARE PARTS LIST...
  • Page 82 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks H02-0054 SOOSAN BG8 25513...
  • Page 83 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. SPARE PARTS LIST...
  • Page 84 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 24890 25528 베어링...
  • Page 85 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. SPARE PARTS LIST...
  • Page 86 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 18062 24581 벤트...
  • Page 87 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. SPARE PARTS LIST...
  • Page 88 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 74780 24200 케이블...
  • Page 89 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. SPARE PARTS LIST...
  • Page 90 유압 윈치 HIAB320T-3 5 : 0 HYDRAULIC WINCH 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 25302 엘보...
  • Page 91 데릭 실린더 HIAB320T-3 6 : 1 DERRICK CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 92 데릭 실린더 HIAB320T-3 6 : 1 DERRICK CYLINDER 2015. 05. 번호 부 품 번 호 품 명 수량 비 고 번호 부 품 번 호 품 명 수량 비 고 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks H01-8728 S01-4262 Φ140×Φ135×15W...
  • Page 93 데릭 실린더 HIAB320T-3 6 : 1 DERRICK CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 94 데릭 실린더 HIAB320T-3 6 : 1 DERRICK CYLINDER 2015. 05. 번호 부 품 번 호 품 명 수량 비 고 번호 부 품 번 호 품 명 수량 비 고 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks A02-2880 데릭...
  • Page 95 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. SPARE PARTS LIST...
  • Page 96 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks A01-0398 BO-4021 붐...
  • Page 97 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. SPARE PARTS LIST...
  • Page 98 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks N01-2592 M10×45 N01-3571...
  • Page 99 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. SPARE PARTS LIST...
  • Page 100 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks N01-2054 M05-1545 간격판...
  • Page 101 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. SPARE PARTS LIST...
  • Page 102 붐 장치 HIAB320T-3 7 : 2 BOOM SYSTEM 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks S01-1696 Φ16×PF1/2 롱...
  • Page 103 신축 실린더 HIAB320T-3 8 : 1 EXTENSION CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 104 신축 실린더 HIAB320T-3 8 : 1 EXTENSION CYLINDER 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks H01-8716 신축...
  • Page 105 1단 신축 실린더 HIAB320T-3 9 : 1 1st EXTENSION CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 106 1단 신축 실린더 HIAB320T-3 9 : 1 1st EXTENSION CYLINDER 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks H01-8717...
  • Page 107 1단 신축 실린더 HIAB320T-3 9 : 1 1st EXTENSION CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 108 1단 신축 실린더 HIAB320T-3 9 : 1 1st EXTENSION CYLINDER 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks SS33T10S2...
  • Page 109 1단 신축 실린더 HIAB320T-3 9 : 1 1st EXTENSION CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 110 1단 신축 실린더 HIAB320T-3 9 : 1 1st EXTENSION CYLINDER 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks S01-0661...
  • Page 111 2단 신축 실린더 HIAB320T-3 10 : 1 2nd EXTENSION CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 112 2단 신축 실린더 HIAB320T-3 10 : 1 2nd EXTENSION CYLINDER 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks H01-8718...
  • Page 113 2단 신축 실린더 HIAB320T-3 10 : 1 2nd EXTENSION CYLINDER 2015. 05. SPARE PARTS LIST...
  • Page 114 2단 신축 실린더 HIAB320T-3 10 : 1 2nd EXTENSION CYLINDER 2015. 05. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 6032201...
  • Page 115 카운터 발란스 밸브 (B) HIAB320T-3 11 : 0 VALVE, CONTER BALANCE (B) 2013. 12. SPARE PARTS LIST...
  • Page 116 카운터 발란스 밸브 (B) HIAB320T-3 11 : 0 VALVE, CONTER BALANCE (B) 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks...
  • Page 117 쉬브 결합체 HIAB320T-3 12 : 0 SHEAVE ASS'Y 2013. 12. SPARE PARTS LIST...
  • Page 118 쉬브 결합체 HIAB320T-3 12 : 0 SHEAVE ASS'Y 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks A01-1631 S01-1596 쉬브...
  • Page 119 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. SPARE PARTS LIST...
  • Page 120 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No.
  • Page 121 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. SPARE PARTS LIST...
  • Page 122 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No.
  • Page 123 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. SPARE PARTS LIST...
  • Page 124 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No.
  • Page 125 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. SPARE PARTS LIST...
  • Page 126 베이스 & 칼럼 호스 결합체 HIAB320T-3 13 : 1 BASE & COLUMN HOSE ASS'Y 2014. 02. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No.
  • Page 127 제어 장치 HIAB320T-3 14 : 0 CONTROL SYSTEM 2013. 12. SPARE PARTS LIST...
  • Page 128 제어 장치 HIAB320T-3 14 : 0 CONTROL SYSTEM 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks A01-1465 2180866 BWF8×16...
  • Page 129 주 제어 밸브 HIAB320T-3 15 : 0 MAIN CONTROL VALVE 2013. 12. SPARE PARTS LIST...
  • Page 130 주 제어 밸브 HIAB320T-3 15 : 0 MAIN CONTROL VALVE 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 987 6537...
  • Page 131 주 제어 밸브 HIAB320T-3 15 : 0 MAIN CONTROL VALVE 2013. 12. SPARE PARTS LIST...
  • Page 132 주 제어 밸브 HIAB320T-3 15 : 0 MAIN CONTROL VALVE 2013. 12. 부 품 번 호 품 명 비 고 부 품 번 호 품 명 비 고 번호 수량 번호 수량 Part No. Description Q`ty Remarks Part No. Description Q`ty Remarks 986 2102...
  • Page 133 스티커 배열 HIAB320T-3 16 : 1 ARRANGEMENT, STICKER 2016. 01. SPARE PARTS LIST...
  • Page 134 스티커 배열 네임 플레이트 ARRANGEMENT STICKER PLATE, NAME P01-3014 HIAB S01-0182 로고 라벨 리빗 LABEL, LOGO RIVET, BLIND P01-3058 320T P01-0159 그리스 니플 모델명 라벨 LABEL, MODEL NAME NIPPLE, GREASE P01-0124 경고 플레이트 낙하주의 PLATE, WARNING P01-0270 붐 각도 플레이트...
  • Page 135 Cheongju Chungbuk 363-893 South Korea. No parts of this publication may be reproduced or copied Tel : +82 43 231 6300 in any form or by any means without written permission Fax : +82 43 231 6200 of Cargotec Korea Ltd. www.hiab.com...

Table of Contents