Setup; General Setup - Pyle PLD71MU Owner's Manual

Setup

USING THE MENU
....GENERAL SETUP PAGE....
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
Go To General Setup Page
1. Touch the screen of
or press the SETUP
2.The SETUP menu is displayed.
3.Select the preferred item by touch the
/ / / range on the screen
or by using the
4.Touch screen of the
Press ENTER on the remote to confirm .
The Following Buttons For Entering
The Selection .
OK
Previous
Enter Up Down
The buttons of the left and right are for
selection of setting type .
The buttons of the up and down are for
selection of the setting program .
Overview Of The Main Menu
( ) ( )
1 2
(1) General Settings
(2) Speaker Settings
(3) DOLBY Digital Settings
(4) Preference Settings
DOLBY
LB
ON
ENG
SPDIF/RAW
ON
ON
ON
range
" SETUP "
button on remote .
/ / / buttons .
" OK " range or
Touch to select
Left
Right
DOLBY
( ) ( )
3 4

GENERAL SETUP

TV Setting
....GENERAL SETUP PAGE....
TV Display
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
Set TV Display Mode
16:9
4:3 Pan Scan
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
-28-
DOLBY
Nor mal/PS
Nor mal/LB
Nor mal/LB
Wide
4:3 Letter Box