Detaching The Control Panel - Pyle PLD71MU Owner's Manual

Installation
How To Remove And Install The Front Panel
When detaching or attaching the control panel, be careful not to damage the
connectors on the back of the control panel and on the panel holder.
Detaching The Front Panel
Before detaching the control panel, be sure to turn off the power.
1). Press the "REL"
RELEASE BUTTON
2). Pull-off the front panel and keep the front panel into the case .
Attaching The Front Panel
1). First insert the right hand side of the front panel into the hollow of the unit .
(NOTE : the "bulge" point on the panel must be attached into the hollow of the unit .)
2). Gently push the left hand side of the front panel until you feel a " Click" .
Hollow
release button and the left hand side of front panel will release.
Bulge
-7-
PROTECTIVE CASE
PUSH