Troubleshooting - Buffalo CF732 Instruction Manual

EN

Troubleshooting

Fault
Gas leaking from Damaged hose
cracked/cut/burned
hose
Gas leaking from Mechanical failure due to
LPG bottle resting or mishandling
Gas leaking from Failure of bottle valve from
LPG bottle valve mishandling or mechanical
failure
Gas leaking Improper installation,
between LPG bottle connection not tight, failure
and regulator of rubber seal
connection
Fire coming through Fire in burner tube section
control panel of burner due to partial
blockage
Grease fire Too much grease buildup in
or continuous burner area
excessive flames
above cooking
surface
Gas issues
Burner will not light
using igniter
Trying to light wrong burner
Burner not engaged with
control valve
Obstruction in burner
No gas flow
Vapour lock at coupling nut
to LPG bottle
Coupling nut and LPG bottle
valve not fully connected.
10
CF732_EN_A5_v1_20220406-for first PO only.indb 10 CF732_EN_A5_v1_20220406-for first PO only.indb 10
Probable Cause
Turn off gas at LPG bottle. If hose is cut or
cracked, replace hose. See LPG bottle lead test
and connection regulator to the LPG bottle
Turn off LPG bottle valve
Turn off LPG bottle valve. Return LPG bottle to gas
supplier
Turn off LPG bottle valve, remove regulator
from cylinder and visually inspect rubber seal
for damage. See LPG bottle test and connection
regulator to the LPG bottle
Turn off control knobs and LPG bottle valve. After
fire is out and appliance is cold, remove burner
and inspect for spider nests or rust. See natural
hazard and cleaning the burner assembly pages.
Turn off LPG Bottle. Allow flames to die down.
After cooling, clean food particles and excess
grease from inside firebox area, grease cup/pan/
tray, and other surfaces
Lighting the appliance
Make sure valve are positioned inside of burner
tubes
Ensure burner tubes are not obstructed with
spider webs or other objects (
& maintenance)
Make sure LPG bottle is not empty. If not empty,
see "Sudden drop in gas flow"
Turn off knobs and disconnect coupling nut from
LPG bottle. Reconnect and retry
Turn the coupling nut approximately one-half to
three-quarters
Solution
Cleaning, care
2022/4/6 17:08 2022/4/6 17:08