Video Mode; Selecting Video Source - Proxima PROAV9350 User Manual

VIDEO MODE

When connecting to those equipment, select the type of Input
source in INPUT SOURCE Menu.
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to "Y, Pb/Cb, Pr/Cr" and then press the
SELECT button.
Y, Pb/Cb, Pr/Cr
When connect the component video output (Cr, Y, Cb or Pr, Y,
Pb) from the video equipment to the R/Pr, G/Y and B/Pb jacks.
When connecting to those equipment, select the type of Video
source in VIDEO SOURCE Menu.
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select VIDEO
SOURCE and press the SELECT button. Another dialog box
VIDEO SOURCE Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the source that you want to select,
and then press the SELECT button.
When connect the composite video output from the video
Video
equipment to the VIDEO/Y jack, select "Video" in VIDEO
SOURCE Menu.
When connect the separate Y/C video output from the
Y/C
video equipment to the VIDEO/Y and C jacks, select
"Y/C" in VIDEO SOURCE Menu.
When connect the S-Video output from the video
S-Video
equipment to the S-Video jack, select "S-Video" in
VIDEO SOURCE Menu.

SELECTING VIDEO SOURCE

WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )
WHEN SELECT THE INPUT 3 (AV TERMINAL )
This box indicates the
Video source being
selected.
3
35