Proxima PROAV9350 User Manual page 12

CONNECTING THE PROJECTOR
INPUT 2
5 BNC INPUT JACKS
Connect the component video output
(Cr, Y, Cb or Pr, Y, Pb) from the video
equipment to the R/Pr, G/Y and B/Pb
jacks or connect the computer output [5
BNC Type (Red, Green, Blue, Horiz.
Sync and Vert. Sync.)] from the
computer to the R/Pr, G/Y, B/Pb, H/HV
and V jacks. (Refer to P14, 15)
serial port IN
serial port OUT
R/C jack
USB
audio OUT
R L
reset
(mono)
INPUT 3
AV INPUT (VIDEO/Y, C) JACKS
Connect the composite video output
from the video equipment to the
VIDEO/Y jack or connect the Separate
Y/C video outputs to the VIDEO/Y and
C jacks. (Refer to P15.)
12
INPUT/OUTPUT TERMINALS AND JACKS
INPUT 1
DVI INPUT TERMINAL
Connect the computer output
(Digital/Analog DVI-I type) to
this terminal.
(Refer to P14.)
DVI
R/Pr H/HV
G/Y B/Pb
S-video
C
video/Y
analog RGB
HDB 15-PIN INPUT TERMINAL
Connect the computer output
(Analog HDB 15-pin type) to
this terminal.
(Refer to P14.)
INPUT 1/2/3/4
AUDIO INPUT JACKS
Connect the audio output
from the computer or
video equipment to these
jacks. (Refer to P14, 15.)
audio
PC control
R
L
(mono)
audio
PC control
V
R L
(mono)
audio
R L
(mono)
PC control
audio
R L
(mono)
INPUT 4
S-VIDEO INPUT JACK
Connect the S-VIDEO
output from the video
equipment to this jack.
(Refer to P15.)
INPUT 1/2/4
CONTROL PORT CONNECTORS
When controlling the computer
with the Remote Control of
this projector, connect the
mouse port of your personal
computer to these connectors.
(Refer to P14.)
INPUT 3