Table of Contents
Advertisement
10
SPECIFICATIONS
AMPLIFIER OUTPUT
Power Amplifier Output (at rated 230/115V supply voltage)
Headphone Output
DISTORTION
THD+Noise (at 1dB below clip into 8Ω measurement bandwidth 22Hz to 22kHz)
Direct Input (Power Amplifier)
Line Inputs
Preamplifier Output
FREQUENCY RESPONSE
Bandwidth (at 80W into 8Ω)
Direct Input
Line Inputs
Phono Input
RIAA Accuracy
SENSITIVITY
Input Sensitivity (for 105W into 8Ω)
Line Inputs 2-5 and Record
Phono
Direct Input
Power Amplifier Gain
Output Sensitivity (at rated inputs)
Record Output
Pre-amplifier output
DIGITAL INPUTS
Input D1
Input D2
Supported Sampling Rates
Supported Bit Depths
THD+Noise (DAC Output from Tape Out)
DIMENSIONS AND WEIGHT
Dimensions (WxHxD)
Net Weight
Packed Weight
POWER
Power Supply
Power Consumption
Fuse Ratings
Remote Batteries
105W per channel into 8Ω
127W per channel into 6Ω
162W per channel into 4Ω
Note: Continued high level use into loads of 6Ω or less may cause
the case to exceed 40°C above ambient temperature and activate
the thermal shut down.
No Load
11.5V
300Ω
8.1V
54Ω
3.6V
32Ω
2.4V
Source Impedance
109Ω
Typically 0.005% at 1kHz
Typically 0.007% at 1kHz
Typically 0.004% at 1kHz
12Hz (0.5dB) to 95kHz (-3dB)
10Hz (-1dB) to 85kHz (-3dB)
15Hz (-3dB) to 85kHz (-3dB)
Better than ±0.5dB 100Hz to 20kHz
196mV load 10k
2mV load 47k in parallel with 220pF
760mV load 50k
31.6dB
196mV
760mV
S/PDIF Isolated 0.5V 75Ω Co-axial
S/PDIF Optical Toslink
32, 44.1, 48, 88.2, 96, 176.4, 192kHz
16 to 24 bit
Typically 0.004% at 1kHz
432 x 82 x 340mm (17 x 3.25 x 13.4in)
12.5kg (27.5lbs)
14kg (30.9lbs)
AC supply 230V / 220V / 115V / 100V nominal ±10%
375W at 1dB below clip into 8Ω
T8 AL 250V - 230V 50Hz / 220V 60Hz
T4 AL 250V - 115V 60Hz / 100V 50/60Hz
AAA (1.5V) x 2
Advertisement
Table of Contents
