Table of Contents
Advertisement
RE_ 610
4.9.
28
Protection Relay
Installation Manual
1
Fig. 4.8.-1
Mounting of the relay and the frame for a RTXP 18 test switch
1) Mounting panel
2) Metallic frame
19" equipment frame mounting (Combiflex)
The relay can be mounted to a 19" equipment frame (4U high, Combiflex) by
using two different types of mounting brackets. The type of mounting
brackets to be ordered depends on whether the relay is to be installed to the
frame as it is or in combination with a test switch of type RTXP 18.
When mounting only the relay, use two mounting brackets of type
1MRS061208, see item 1 in Fig. 4.9.-1.
When mounting a relay with a test switch (RTXP 18) by its side, use one
mounting bracket of type 1MRS061208 and one of type 1MRS061207, see
items 1 and 2 in Fig. 4.9.-2.
The mounting brackets are made of hot galvanized steel sheet. Mount the
mounting brackets to the case by using the same fixing screws as in flush
mounting. The case contains all the mounting accessories needed. Mount the
case to the 19" equipment frame.
1MRS752265-MUM
2
A040179
Advertisement
Table of Contents
