Safety Of Others; Residual Risks - Black & Decker BEMWH551 Original Instructions Manual

Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN50636 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated. When assessing vibra-
tion exposure to determine safety meas-
ures required by 2002/44/EC to protect
persons regularly using power tools in
employment, an estimation of vibration
exposure should consider, the actual
conditions of use and the way the tool is
used, including taking account of all parts
of the operating cycle such as the times
when the tool is switched off and when
it is running idle in addition to the trigger
time.Do not operate the tool if the vibra-
tion registers as abnormal.

Safety of others

This appliance is not intended for use
u
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
(Original instructions)
Children must be supervised to
u
ensure that they do not play with the
appliance.
After striking a foreign object. Inspect
u
the appliance for damage and make
repairs as necessary.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc. Even with the application of
the relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Injuries caused by touching any
u
moving parts.
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
parts or accessories.
Injuries caused by prolonged use of
u
the appliance.
When using any appliance for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
If operating the mower in a damp
u
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Autogoods "130"
ENGLISH
9