Set Time And Date Menu - wattstopper RT-200 Installation Instructions Manual

All manuals and user guides at all-guides.com

SET TIME AND DATE MENU

Within the SET TIME AND DATE menu you will enter the correct time, date and
Daylight Savings Time (DST) start and end days. The unit is shipped with the
correct DST start and end dates already programmed.
Setting
TIME
Hour 1. From the SETUP menu highlight SET TIME AND
DATE and press the CENTER button. TIME should be
highlighted.
Press the CENTER button to highlight hour.
2. Press the ↓ button to decrease hour or the ↑ button
to increase hour.
3. Press the CENTER button to save hour setting and
move highlighted cursor to minute.
Minute Follow step 2 above.
Press the CENTER button to save time setting.
DATE 1. Press the ↓ button to highlight DATE.
Month 1. Press the CENTER button to highlight month.
2. Press the ↓ button to decrease the month or the ↑
button to increase the month.
3. Press the CENTER button to save month setting and
move highlighted cursor to day.
Day Follow step 2 above.
Press the CENTER button to save day setting and move
highlighted cursor to year.
Year Follow step 2 above.
Press the CENTER button to save year setting.
DAYLIGHT Factory Default Setting: DST ENABLED (The unit will
SAVINGS TIME automatically adjust for Daylight Savings Time). Press
(DST) the ↓ button to highlight DST
DST 1. Press the CENTER button to highlight ENABLED.
2. Press the ↑ button to switch between ENABLED and
When enabled,
DISABLED.
DST appears in
the upper right
3. Press the CENTER button to save DST setting.
corner of the
MAIN PAGE.
Start - Week 1. Press the ↓ button to highlight START. Press the
(Input week when CENTER button to highlight 1st.
DST starts)
2. Press the ↓ button to decrease the week of the
month or the ↑ button to increase the week of the
month.
3. Press the CENTER button to save the week and move
highlighted cursor to the month.
Start – Month Follow step 2 above.
(Input month
Press the CENTER button to save month.
when DST starts)
End – Week Press the ↓ to highlight End. Follow same steps for
Start – Week.
End – Month Follow same steps for START - Month.
To exit SET TIME AND DATE menu, press the ↓ button to highlight PREVIOUS
menu. Press the CENTER button to select and return to the SETUP menu.
www.wattstopper.com
Steps