Location Menu - wattstopper RT-200 Installation Instructions Manual

All manuals and user guides at all-guides.com

LOCATION MENU

Within the LOCATION menu you will be required to enter the local longitude/
latitude coordinates and time zone. If you do not know this information, we have
included a list of the major US cities or go to our website for a more detailed list
at www.wattstopper.com/RT-200.
Setting
TIME ZONE 1. From the SETUP menu highlight LOCATION and press
the CENTER button. TIME ZONE should be highlighted.
Press the CENTER button to select the time zone.
2. Press the ↓ button to decrease the time zone.
Press the ↑ button to increase the time zone.
3. Press the CENTER button to save time zone setting.
LONGITUDE 1. Press the ↓ button to highlight LONGITUDE. Press the
CENTER button to select the longitude
Follow step 2 above.
Press the CENTER button to save longitude setting.
LATITUDE 1. Press the ↓ button to highlight LATITUDE. Press the
CENTER button to select the latitude.
Follow Step 2 above.
Press the CENTER button to save latitude setting.
To exit the LOCATION menu, press the ↓ button to highlight PREVIOUS MENU.
Press the CENTER button to select and return to the SETUP menu. Once the
location information is entered, return to the MAIN PAGE and press the left
button. This will display the sunrise and sunset times. Use this as a check to
validate that the location information has been entered in correctly.
PREFERENCES
The PREFERENCES menu allows the user to customize the unit's features
including the time/date format, sound and flash.
Time format – choose between a 12-hour or 24-hour format
Date format – choose between MM/DD/YY or DD-MM-YY
Sound – When SOUND is enabled the RT-200 will beep every 5 seconds when the
load is going to be turned OFF in less than a minute. It will also beep each time
the user presses the ↑, the CENTER, or the ↓ button. A small ear icon will
appear on the MAIN PAGE when sound is enabled.
Flash – When FLASH is enabled the RT-200 turns OFF the load for 1 second and
then turns it back ON to warn the user that the load is turning OFF in 1 minute.
When flash is enabled, a lightening bolt icon will appear on the MAIN PAGE.
Setting
TIME FORMAT 1. From the SETUP menu highlight PREFERENCES
and press the CENTER button. TIME FMT should be
highlighted.
Press the CENTER button to select time format.
2. Press ↑ button to change format.
3. Press the CENTER button to save time format setting
and to move highlighted cursor back to TIME FMT.
DATE FORMAT 1. Press the ↓ button to highlight DATE FMT. Press the
CENTER button to select date format.
Follow step 2 above.
Press the CENTER button to save date format.
SOUND 1. Press the ↓ button to highlight SOUND. Press the
CENTER button to select the sound setting.
Follow step 2 above to enable or disable sound.
Press the CENTER button to save setting.
FLASH 1. Press the ↓ button to highlight FLASH. Press the
CENTER button to select the flash setting.
Follow step 2 above to enable or disable flash.
Press the CENTER button to save setting.
To exit the PREFERENCES menu, press the ↓ button to highlight PREVIOUS
MENU. Press the CENTER button to select and return to the SETUP menu.
Call 800.879.8585 for Technical Support
Steps
Steps