Download  Print this page

wattstopper RT-50 Installation Instructions Manual

Hide thumbs
   

Advertisement

Please read all instructions before installing

SPECIFICATIONS

Voltage ....................................................................... 120VAC, 60HZ
Load (Single Pole Circuit)
Incandescent or fluorescent lamp ........................... 0 – 600 Watt
Fan Motor ............................................................................1/6HP
Time Delay...............................................1, 5, 10, 20, 30, 60 minutes
Environment ..............................................................Indoor use only
Operating Temperature ..............................32° to 131°F (0° to 55°C)
Humidity ....................................................95% RH, non-condensing
Tools Needed
Insulated Screwdriver
Wire Strippers
DESCRIPTION AND OPERATION
The RT-50 is a time switch that turns OFF the connected light or fan when the
selected time expires. The light behind the ON/OFF button illuminates while the
switch is OFF. One of the time button indicators is always lit to indicate the last
used timer.
Manual ON
Turn ON the connected light or fan by pressing the desired time button, or the
ON/OFF button. If you press the ON/OFF button, it activates the timer that was
last used.
Manual OFF
While a timer is active, you can press the ON/OFF button to turn OFF the
connected light or fan without delay.
Changing the selected time
If you decide that you need more or less time than you originally selected, restart
the time switch by pressing the button that matches the amount of time you think
you'll need.
Call 800.879.8585 for Technical Support
Time Switch
7- Button Preset
Santa Clara, CA 95050
RT- 50

Advertisement

Table of Contents
loading

  Related Manuals for wattstopper RT-50

  Summary of Contents for wattstopper RT-50

  • Page 1: Specifications

    Santa Clara, CA 95050 DESCRIPTION AND OPERATION The RT-50 is a time switch that turns OFF the connected light or fan when the selected time expires. The light behind the ON/OFF button illuminates while the switch is OFF. One of the time button indicators is always lit to indicate the last used timer.
  • Page 2: Installation And Wiring

    If a proper ground is not available, consult with a qualified electrician before continuing installation. Only connect the RT-50 to a Single Pole Circuit. The RT-50 is not suitable for 3-way switching. If the existing wiring does not match the description for a Single Pole Circuit, you should consult with a qualified electrician.
  • Page 3: Troubleshooting

    Light or fan will not turn OFF: • Press the ON/OFF button. If connected light or fan does not turn OFF, turn OFF power to the circuit then check wire connections. COVER PLATES WattStopper RT wall switches fit behind industry standard decorator style switch cover plates. WARRANTY INFORMATION WattStopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years.
  • Page 4: Especificaciones

    Santa Clara, CA 95050 DESCRIPCION Y OPERACIÓN El RT-50 es un interruptor temporizado que apaga la lámpara (o ventilador) conectada (o) a él cuando expira el tiempo de Retardo de Apagado seleccionado. El botón de ENCENDIDO/APAGADO y la luz indicadora de Retardo de Apagado permanecen encendidos mientras el interruptor está...
  • Page 5: Instalación Y Cableado

    Si no existe una conexión a tierra apropiada, consulte con un electricista competente antes de continuar la instalación. Sólo conecte el RT-50 a un circuito unipolar. El RT-50 no es apropiado para conmutación de 3 vías. Si el cableado existente no coincide con la descripción de un circuito unipolar, usted debe consultar con un electricista competente.
  • Page 6 PLACAS DECORATIVAS Utilice placas decorativas estándar con los sensores RT de WattStopper. INFORMACIÓN SOBRE LA GARANTIA DE PRODUCTO WattStopper garantiza que sus productos están libres de defectos en sus materiales y ensamble por un período de cinco (5) años.