Set Time And Date Menu - wattstopper RT-200 Installation Instructions Manual

SET TIME AND DATE MENU

Within the SET TIME AND DATE menu you will enter the correct time, date and
Daylight Savings Time (DST) start and end days. The unit is shipped with the
correct DST start and end dates already programmed.
Setting
TIME
Hour
Minute
DATE
Month
Day
Year
DAYLIGHT
SAVINGS TIME
(DST)
DST
When enabled,
DST appears in
the upper right
corner of the
MAIN PAGE.
Start - Week
(Input week when
DST starts)
Start – Month
(Input month
when DST starts)
End – Week
End – Month
To exit SET TIME AND DATE menu, press the ↓ button to highlight PREVIOUS
menu. Press the CENTER button to select and return to the SETUP menu.
1. From the SETUP menu highlight SET TIME AND
DATE and press the CENTER button. TIME should be
highlighted.
Press the CENTER button to highlight hour.
2. Press the ↓ button to decrease hour or the ↑ button
to increase hour.
3. Press the CENTER button to save hour setting and
move highlighted cursor to minute.
Follow step 2 above.
Press the CENTER button to save time setting.
1. Press the ↓ button to highlight DATE.
1. Press the CENTER button to highlight month.
2. Press the ↓ button to decrease the month or the ↑
button to increase the month.
3. Press the CENTER button to save month setting and
move highlighted cursor to day.
Follow step 2 above.
Press the CENTER button to save day setting and move
highlighted cursor to year.
Follow step 2 above.
Press the CENTER button to save year setting.
Factory Default Setting: DST ENABLED (The unit will
automatically adjust for Daylight Savings Time). Press
the ↓ button to highlight DST
1. Press the CENTER button to highlight ENABLED.
2. Press the ↑ button to switch between ENABLED and
DISABLED.
3. Press the CENTER button to save DST setting.
1. Press the ↓ button to highlight START. Press the
CENTER button to highlight 1st.
2. Press the ↓ button to decrease the week of the
month or the ↑ button to increase the week of the
month.
3. Press the CENTER button to save the week and move
highlighted cursor to the month.
Follow step 2 above.
Press the CENTER button to save month.
Press the ↓ to highlight End. Follow same steps for
Start – Week.
Follow same steps for START - Month.
www.wattstopper.com
Steps