Specifying The File Name Serial Number Generation Method; Using The Alarm - Casio EXILIM EX-Z55 User Manual

OTHER SETTINGS
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page 127).
1.
Press [MENU].
2.
Select the "Set Up" tab, select "File No.", and
then press [ ].
3.
Use [ ] and [ ] to change the setting, and
then press [SET].
To do this for a newly saved file:
Store the last file number used and
increment it, regardless of whether
files are deleted or whether the
memory card is replaced with a new
one
Find the highest file number in the
current folder and increment it
Select this setting:
Continue
Reset
137

Using the Alarm

You can configure up to three alarms that cause the
camera to beep and display a specified image at the time
you specify. Specifying a movie or an audio snapshot plays
back the image and the audio at the assigned time.
Specifying a voice recording file plays the audio.
• You can configure up to three alarms, named "Alarm 1",
"Alarm 2", and "Alarm 3".
1.
In the PLAY mode, press [MENU].
2.
Select the "PLAY" tab, select "Alarm", and
then press [ ].
3.
Use [ ] and [ ] to select the alarm (1, 2, or 3)
whose setting you want to configure, and
then press [ ].
4.
Use [ ] and [ ] to select the setting you want
to change, and then use [ ] and [ ] to
change the selected setting.
• You can set an alarm time and configure the alarm to
sound only once (Once) or at the same time
everyday (Daily). You can also turn the alarm on or
off.