Table of Contents
Advertisement
OTHER SETTINGS
IMPORTANT!
• You can select any one of the following types of
image as the startup image.
— The camera's built-in startup image
— A snapshot you recorded with the camera
— A movie you recorded with the camera two
seconds or less in length and 200KB or less in
size
• The snapshot image or movie that you select as the
startup image is stored in a special memory location
called "startup image memory". Only one image can
be stored in startup image memory at one time.
Selecting a new startup image overwrites anything
that is already stored in startup image memory.
Because of this, if you want to return to a previous
startup image, you need to have a separate copy of
that image in the camera's standard image memory.
Note that you cannot delete an image from startup
image memory. You can only replace it with another
image.
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page 85).
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "File No.", and
then press [ ].
3.
Use [ ] and [ ] to change the setting, and
then press [SET].
98
Advertisement
Table of Contents
