Advertisement
CONFIGURATION
LINK UP CONFIGURATOR APP
To configure your system, some parameters must be
calibrated through the Link Up gateway. These parameters
are:
•
number of engines, which should be analyzed
through this gateway
•
the engine instances of those motors
•
which alarms you want to receive on your dashboard
LINK UP
CONFIGURATOR
GATEWAY CONFIGURATION
This is possible through the "Link Up Configurator"
smartphone App, which can be downloaded free of charge
from the stores of both Android and iOS devices.
A simple and detailed explanation of the configuration
process is also available as in-app instructions.
Thanks to the passive embedded NFC receiver, the Link
Up gateway can be configured, as described below,
without the need of power supply.
Link Up Configurator App is
available for both iOS and
Android devices
1.
Launch the "Link Up Configurator" App and
read the actual configuration of the Link Up
device by "tapping" the smartphone onto the
Link Up wireless area (indicated by the red
arrow).
NOTE: The antenna position on the
smartphone depends on the model.
Please refer to the smartphone manufacturer
manual.
SYSTEM INSTALLATION
B001030
Advertisement
