H3C S12500 Series Configuration Manual page 3

Preface
The H3C S12500 documentation set includes 17 configuration guides. These guides describe the
software features for the H3C S12500 Series 10G Core Routing Switches and guide you through the
software configuration procedures. These guides also provide configuration examples to help you apply
software features to different network scenarios.
The OAA Configuration Guide describes the Open Application Platform (OAP) and OAP configuration.
After you configure OAP on the switch, the switch can interact with and control OAP modules.
This preface includes:
Audience
•
Conventions
•
• About the H3C S12500 documentation set
Obtaining documentation
•
Technical support
•
• Documentation feedback
Audience
This documentation is intended for:
Network planners
•
Field technical support and servicing engineers
•
Network administrators working with the S12500 series
•
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention
Boldface
Italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
Description
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are optional.
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
Asterisk marked square brackets enclose optional syntax choices separated by vertical