Table of Contents
Advertisement
II. Safety
IMPORTANT Safety Items to be Observed.
Safety Warnings
! DANGER (may cause serious damage to property and or casualties)
1. Please carefully read this User Manual prior to operating the instrument and observe the
instructions on safe operation.
2. Ensure that only trained staff operate this instrument
3. The power source must be grounded reliably and away from any sources of
electromagnetic interference.
4. Ensure that the instrument and its accessories are free of any potential defects.
5. Confirm that the voltage and frequency of the power supply matches the specified voltage
and frequency specified prior to use.
6. Ensure the cover of the junction box is properly installed prior to operation.
7. Always wear applicable PPE whilst operating the instrument.
8. Place the instrument on a stable, dry, clean, antiskid, and fireproof surface.
9. Ensure there is sufficient ventilation gaps and spacing above and around the instrument
10. Ensure the instrument is stable and level and will not move due to vibration upon start-up.
11. Liquid must not enter the casing
! WARNING (may cause property damage or personal injury)
12. The working environment must be free of any flammable, explosive, volatile or corrosive
substances.
13. Only accessories listed as 'optional accessories' for use, can guarantee operational safety.
14. Ensure handling and disposal of packaging is compliant to local environmental laws and
regulations.
! ATTENTION (may affect operational performance or service life)
15. The instrument is deenergised only when the power cable is disconnected from the power
source.
16. Ensure the instrument and its accessories are protected external vibration.
17. The Company reserves the right to modify the design and technical data of the pump
without notice.
18. Only accredited and qualified professional repair technicians can open the instrument or
conduct required repairs. Persons performing repairs on the instrument other than those
selected or approved by the Company shall operate to void any warranty contained
hereinabove for the product
19. Do NOT operate this instrument immediately after transport, wait 1-2 days before
operating. The instrument must be used in accordance with this User Manual.
Version 1.0
User Manual
6
Advertisement
Table of Contents
