Table of Contents
Advertisement
7.1 User Interface
•
TEMP: Displays the measured temperature value. To set the desired
temperature, press the SETTINGS key until the TEMP SET value flashes. Press
the setting key again to confirm the parameter.
•
SET: Displays the desired temperature value set manually.
•
RUN: Indicates that the chiller is operating.
•
Cooling Indicator: Indicates chiller is cooling.
•
Circulation Indicator: Indicates pump is operating.
•
TIME: Displays the set running time; this value counts down to zero and
operation stops. To set a timer, press the SETTINGS key. When the TIME value
flashes, enter the desired time using they arrow keys. Leave at zero if a timer is
not needed.
•
Silence Indicator: Indicates a silenced alarm.
•
Alarm Indicator: Indicates an alarm.
Settings: Used for manually setting values and parameters.
Left Arrow: Shifts to the numbers on the left to set desired value.
Down Arrow: One push will decrease 1 digit; A long press will decrease digits faster.
Up Arrow: One push will increase 1 digit; A long press will increase digits faster.
Cooling Key: Press and hold key for more than 4 seconds to control start/stop the
cooling function.
Circulation Key: Press to start/stop the circulation function.
Version 1.0
User Manual
12
Advertisement
Table of Contents
