Table of Contents
Advertisement
VIII. Troubleshooting
Problem
The power cord is unplugged
or not plugged in correctly
No power
Tripped Breaker
IX.
Maintenance and Cleaning
Keep the instrument dry and clean in routine operations.
Clean the outer surface with a non-abrasive cleanser and only connect the power supply
when the entire instrument surface is dry.
If liquid or moist solids enters the instrument, please immediately disconnect the power supply
and contact supportusa@hollandgreenscience.com
•
Surface stains on the instrument should be cleaned only by a clean, soft rag and detergent.
•
The power must be disconnected before any maintenance or cleaning.
•
Do not clean the instrument with any corrosive cleaning solutions.
•
If the instrument is left unused for a long period, switch 'OFF' the power and store within a
dry, clean, level, and stable surface at normal temperature.
Caution!
Before any Maintenance or Inspection, the Power Cable
MUST be removed from the power socket.
Version 1.0
Causes
Reinsert
Reset once, if a further trip occurs,
contact
serviceusa@hollandgreenscience.com
User Manual
Solution
15
Advertisement
Table of Contents
