Table of Contents
Advertisement
User Manual
7.2 Startup
Connect the power according to the power outlet.
Turn on the instrument at the main switch. The display shows the initialization sequence before
the instrument is ready to use.
NOTE: Every time you turn on the instrument it will beep intermittently, the icon of visual alarm
and the word "end" will appear on the display.
7.3 Setting of parameters
Temperature Setting
When the instrument is switched on, press the
button one time, and the set temperature
value will start to flash. Set the desired temperature value with
or
keys
The
button allows for movement between the digits.
Confirm the set value with another press of
button.
Time Settings
Press the
button.
The last value of the set time (timer) will start to flash. Set the desired value (hh:mm) by pressing
or
keys. The
button allows for movement between the digits.
Confirm the set value with another press of
button.
NOTE: the value "00:00" indicates the operating mode is continuous, once you start with the
START / STOP button, the system will continue maintaining the set temperature until it is stopped
manually.
If you set the timer, such as one hour, the instrument will reach the set temperature and maintain
it for one hour.
Version 1.0
13
Advertisement
Table of Contents
