Table of Contents
Advertisement
Prewash
13
touch button
Acoustic signals
On/Off push
14
button
Use this option to add a pre-wash phase at 30 °C before the
washing phase.
The corresponding indicator above the touch button illumi‐
nates.
This option is recommended for heavily soiled laundry, espe‐
cially if containing sand, dust, mud and other solid particles.
The extra amount of detergent will be added automatically in
the prewash phase.
When selecting a pre-wash phase and AutoDose
is active, the appliance will automatically dose the
detergent. When AutoDose is switched off, put
the detergent/additive in a dosing ball inside the
drum.
The options can increase the programme dura‐
tion.
This appliance is provided with different acoustic signals, that
operate when:
• You activate the appliance (special short tune).
• You deactivate the appliance (special short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short sounds).
• The programme is completed (sequence of sounds for
about 2 minutes).
• The appliance has a malfunction (sequence of short
sounds for about 5 minutes).
To deactivate/activate the acoustic signals when the pro‐
gramme is completed, touch the
multaneously for about 6 seconds.
If you deactivate the acoustic signals, they contin‐
ue operate when the appliance has a malfunction.
Pressing this button for a few seconds allows to activate or
deactivate the appliance. Two different tunes sound while
switching the appliance on or off.
As the Stand-by function automatically deacti‐
vates the appliance to decrease the energy con‐
sumption in a few cases, you may need to acti‐
vate the appliance again.
Refer to "Stand-by option" paragraph in "Daily
Use" chapter for more details.
ENGLISH
and the
buttons si‐
15
Advertisement
Table of Contents
