Advertisement

Quick Links

EW6F341S
EN
Washing Machine
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EW6F341S

  • Page 1 EW6F341S Washing Machine User Manual...
  • Page 2: Table Of Contents

    16. ACCESSORIES....................33 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    The operating water pressure at the water entry point • from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base must not be • covered by a carpet, mat, or any floor covering.
  • Page 5 ENGLISH 2.4 Use Service Centre to ensure which accessories can be used. WARNING! 2.2 Electrical connection Risk of injury, electric shock, fire, burns or damage to the • The appliance must be earthed. appliance. • Always use a correctly installed shockproof socket.
  • Page 6: Installation

    3. INSTALLATION WARNING! Refer to Safety chapters. 3.1 Unpacking 1. Remove the external film. If necessary, 2. Remove the cardboard top and the use a cutter. polystyrene packaging materials. 3. Open the door. Remove all the items from 4. Put the front polystyrene packaging the drum .
  • Page 7 ENGLISH 7. Remove the three transit bolts and pull out 8. Put the plastic caps, that you find in the the plastic spacers. user manual bag, in the holes. We recommend that you WARNING! keep the packaging and Do not put cardboard, wood the transit bolts for any or equivalent materials transport of the appliance.
  • Page 8 3. If necessary, loosen the ring nut to set directly into the stand pipe. it in the correct position. 4. Connect the water inlet hose to the cold water tap with 3/4'' thread. 3. Water drainage The drain hose should stay at a height of no less than 60 cm and not more than 100 cm.
  • Page 9: Product Description

    ENGLISH 6. Position the hose directly to a built-in it with a clamp. drain pipe in the room wall and tighten 4. PRODUCT DESCRIPTION 4.1 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate...
  • Page 10 5.2 Control panel description Denim Cotton Outdoor Cotton Eco Sport Synthetics Wool Delicate Silk Rapid 14 min. Rinse Programme dial Easy iron touch button Spin reduction options touch button Soft Plus touch button Extra rinse touch button Temperature touch button...
  • Page 11: Dial And Buttons

    ENGLISH The Temperature area: Temperature indicator Cold water indicator Child safety lock indicator. Delay start indicator. Door locked indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. Time Manager bars level indicator.
  • Page 12 The intermediate and the final 6.3 Temperature spinning phases are suppressed and When you select a washing programme, the programme ends with water in the the appliance automatically proposes a drum. This helps to reduce creasing. default temperature. The display shows the indicator The door stays locked.
  • Page 13 ENGLISH Touch the button repeatedly to set the This option increases the required delay. The time increases in programme duration. steps of 1 hour up to 20 hours. This option is not available with a temperature lower After touching the Start/Pause than 40 °C.
  • Page 14: Programmes

    6.12 Start/Pause indicator Cot‐ Syn‐ Touch the Start/Pause button to start, Cot‐ thet‐ pause the appliance or interrupt a running programme. ■ ■ ■ 1) Default duration for all programmes. 7. PROGRAMMES 7.1 Programme Chart Programme Maximum Maxi‐ Programme description Default tem‐...
  • Page 15 ENGLISH Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range [rpm ] 1400 rpm 10 kg To spin the laundry and to drain the water in Drain/Spin (1400 the drum.
  • Page 16 Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range [rpm ] 1200 rpm Outdoor 2 kg Do not use fabric softener and (1200- 30 °C make sure that there is no soften‐...
  • Page 17 ENGLISH Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range [rpm ] 1200 rpm 4 kg Special programme for Denim clothing Denim (1200 - with delicate washing phase to minimize 30 °C 400) colour fading and marks.
  • Page 18: Settings

    Pro‐ gramme ■ ■ ■ Silk Wool ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Sport Outdoor ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Denim 7.2 Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Compa‐...
  • Page 19: Before First Use

    ENGLISH 9. BEFORE FIRST USE 1. Make sure that the electrical power is This removes all possible dirt from the available and the water tap is open. drum and the tub. 2. Pour a small quantity of detergent into the compartment marked by 3.
  • Page 20 10.3 Filling the detergent and additives Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liq‐ uid additives. Flap for powder or liquid deter‐...
  • Page 21 ENGLISH 10.7 Starting a programme with the delay start 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. On the display the indicator shows 2. Touch the Start/Pause button. The appliance door locks and starts the countdown of the delay start.
  • Page 22 10.11 Opening the door - calculate the real programme duration. During this phase the Time Adding garments Manager bars placed below the If the temperature and level time digits play a simple animation. of the water in the drum are 2.
  • Page 23: Hints And Tips

    ENGLISH 10.13 Draining water out after 4. Press the On/Off button for a few seconds to deactivate the appliance. end of cycle 10.14 Stand-by option If you have chosen a programme or an option that does not empty out the water The Stand-by function automatically of the last rinse, the programme is deactivates the appliance to reduce the...
  • Page 24: Care And Cleaning

    • Follow the instructions that you find that the items are spaced evenly on packaging of the detergents or around the tub; other treatments without exceeding c. press the Start/Pause button. the indicated maximum level ( The spin phase continues.
  • Page 25 ENGLISH Regularly examine the drum to check for • Remove all laundry from the limescale. drum. • Select the Cotton programme Regular detergents already contain water with the highest temperature softening agents, but we recommend to Add a small quantity of powder run a cycle with an empty drum and a detergent into the empty drum, in descaling product occasionally.
  • Page 26 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 3. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess.
  • Page 27 ENGLISH Proceed as follows to clean the pump: 180˚ WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
  • Page 28: Troubleshooting

    12.8 Cleaning the inlet hose and the valve filter 45° 20° 12.9 Emergency drain 3. Put the two ends of the inlet hose in a container and let the water flow out If the appliance cannot drain the water, of the hose.
  • Page 29 ENGLISH Pause button may flash • - The mains supply is unstable. continuously: Wait until the mains supply is stable. • - No communication between • - The appliance does not fill electronic elements of the appliance. with water properly. Start the Switch it off and switch on again.
  • Page 30 Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged.
  • Page 31: Consumption Values

    ENGLISH Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to "Installation instruction". The appliance makes • Make sure that the packaging and/or the transit bolts an unusual noise and are removed. Refer to "Installation instruction". vibrates.
  • Page 32: Technical Data

    Programmes Load Energy Water Approxi‐ Remain‐ (kg) con‐ con‐ mate pro‐ ing mois‐ sumption sumption gramme ture (%) (kWh) (litre) duration (minutes) Cotton 60°C 2,04 Cotton 40°C 1,40 Synthetics 40°C 0,80 Delicate 40°C 0,56 Wool 30°C 0,42 Standard cotton programmes 0,92 Standard 60°C cotton...
  • Page 33: Accessories

    1400 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 15.1 Additional technical data Brand logo ELECTROLUX Name of the distributor Electrolux Lehel Kft 1142 Budapest Erzsébet kir.né útja 87 Model denomination EW6F341S Measure unit...
  • Page 34 16.4 Available in www.electrolux.com/shop or from authorised dealer Only appropriate accessories approved by ELECTROLUX ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 17. ENVIRONMENTAL CONCERNS...
  • Page 35 ENGLISH...
  • Page 36 www.electrolux.com/shop...

Table of Contents