Electrolux EW6F348SA User Manual page 12

12 www.electrolux.com
Temperature
3
touch button
Display
4
AutoDose
Fabric Soften‐
5
er touch but‐
ton
AutoDose Liq‐
6
uid Detergent
touch button
By means of the Spin
• Activate the Rinse Hold option .
The water of the last rinse is not drained out to prevent the
fabrics from creasing. The washing programme ends with
water in the drum and the final spin phase is not per‐
formed.
The display shows the indicator
The door stays locked. The drum turns regularly to reduce
creasing. You must drain the water to unlock the door.
Touch Start/Pause
spinning phase and drains the water.
• Activate the Silent option.
All spinning phases (intermediate spin and final spin) are
suppressed and the programme ends with water in the
drum. This helps to reduce creasing.
As the programme is very quiet, it is suitable for use at
night time when cheaper electricity tariffs are available. In
some programmes the rinses are performed with more wa‐
ter.
The display shows the indicator
The door stays locked. The drum turns regularly to reduce
creasing. You must drain the water to unlock the door.
Touch the Start/Pause button
performs only the draining phase.
The appliance empties the water out automatical‐
ly after approximately 18 hours.
When you select a washing programme, the appliance auto‐
matically proposes a default temperature.
Touch this button repeatedly until the desired temperature val‐
ue appears on the display.
When the display shows the indicators
not heat the water.
It provides information about the setting programme. Refer to
"Display" paragraph for more details.
For activating and deactivating the automatic fabric softener
loading. Refer to "The AutoDose Technology (Autodosing)"
chapter for more details.
For activating and deactivating the automatic detergent load‐
ing. Refer to "The AutoDose Technology (Autodosing)" chap‐
ter for more details.
button you can also set:
.
button: the appliance performs the
.
button: the appliance
, the appliance does